Scanner could not allocate required memory - Epson Office Equipment & Supplies

you need additional memory for the fax or scanner for scanning large files.

Answered previously

Get rid of glare by turning it off and buying and buying a DECENT tablet. This Nextbook is a piece of crap. You cannot change memory allocation.

> FAT ALLOC ERROR

FAT == File Allocation Table (like a 'Table of Contents' in a printed book)

ALLOC == Allocation

ERROR == ERROR

Some of the contents of that 'Table of Contents' are invalid.

So, copy all the files from the Memory Card onto your computer, to save a copy of those files.

Burn a CD/DVD disk with a copy of those files.

Then, "reformat" the Memory Card, to write a "new" and "empty" 'Table of Contents' onto the device.
Then, copy all the files back onto the Memory Card.

If you installed total 4GB memory, the system will detect less than 4GB of total memory because of address space allocation for other critical functions, such as:

- System BIOS (including motherboard, add-on cards, etc..)
- Motherboards resources
- Memory mapped I/O
- configuration for AGP/PCI-Ex/PCI
- Other memory allocations for PCI devices

Different onboard devices and different add-on cards (devices) will result of different total memory size.
e.g. more PCI cards installed will require more memory resources, resulting of less memory free for other uses.

On a SLI system, since PCI-Ex graphic cards will occupy around 256MB, another 256MB will be occupied after you install a 2nd PCI-Ex graphic card. Hence, 2.75GB memory left only if two SLI cards installed on A8N-SLI Premium while 3.0GB memory left with one graphic card without other add-on devices.

This limitation applies to most chipsets & Microsoft Windows 32-bit version operating systems.

If you install Windows 32-bit version operating system, we recommend that you install less than 3GB of total memory. If more than 3GB memory is required for your system, then below two conditions must be met: 1. The memory controller which supports memory swap functionality is used. Chipsets later than Intel 975X, 955X, Nvidia NF4 SLI Intel Edition, Nvidia NF4 SLI X16, and AMD K8 CPU architecture support memory swap function. 2. Windows 64-bit OS which can address more than 4GB memory. You can check below URLs for reference:
http://dlsvr.asus.com/pub/ASUS/mb/4GB_Rev1.pdf
hope this helps

Need more memory or the resolution is set too high.

increase the space for virtual memory

Turned off scanner. Rebooted computer. Turned on scanner again. Works fine now.

From the Asus support site.

If you installed total 4GB memory, the system will detect less than 4GB of total memory because of address space allocation for other critical functions, such as:

- System BIOS (including motherboard, add-on cards, etc..)
- Motherboards resources
- Memory mapped I/O
- configuration for AGP/PCI-Ex/PCI
- Other memory allocations for PCI devices

Different onboard devices and different add-on cards (devices) will result of different total memory size.
e.g. more PCI cards installed will require more memory resources, resulting of less memory free for other uses.

On a SLI system, since PCI-Ex graphic cards will occupy around 256MB, another 256MB will be occupied after you install a 2nd PCI-Ex graphic card. Hence, 2.75GB memory left only if two SLI cards installed on A8N-SLI Premium while 3.0GB memory left with one graphic card without other add-on devices.

This limitation applies to most chipsets & Microsoft Windows 32-bit version operating systems.

If you install Windows 32-bit version operating system, we recommend that you install less than 3GB of total memory. If more than 3GB memory is required for your system, then below two conditions must be met: 1. The memory controller which supports memory swap functionality is used. Chipsets later than Intel 975X, 955X, Nvidia NF4 SLI Intel Edition, Nvidia NF4 SLI X16, and AMD K8 CPU architecture support memory swap function. 2. Windows 64-bit OS which can address more than 4GB memory.

Please increase your PC's Virtual Memory from Performance tab under Device manager.