Question about Epson Stylus Pro 10000 InkJet Printer

1 Answer

Epson 10000 Doesn't print full image.

The printer begins to print w/o problems, however it cuts off about 20-40% of the image it is supposed to print. As if it is printing a selection of the image, although nothing is selected, nor is this box checked in the printer dialogue box. I have reset the printer, turned it off/on, and same for the computer to no avail. I'm printing through photoshop.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi, Go in the printer section under Control panel. Right click Epson 10000 icon, than Properties. Go to Ports. Click the port it is using. Configure port. Protocol must be LPR Queue name under LPR settings: type: print (small letters) Check LPR counting enabled box.
Try. It should work.

Posted on Jul 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson 10000 not printing cyan and black


Take the inks out and put them back in. May have got unseated. Check for foreign objects which may have jammed the heads.

Jul 08, 2016 | Epson...

Tip

Epson Stylus pro 10000 Vista x64 Compatible? YES


Use the driver for the next model up: Epson stylus pro 16000.  A 64 bit driver is available for XPx64 on Epson site:  http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=19156&prodoid=22966689&infoType=Downloads&platform=All Install Printer Driver v5.50 in Vista x64.  The 10000 will print 100%, just like in XP with its own drivers.  Any problems?  I would happy to help you save the time I spent before finding that out.
Good luck!

on Apr 05, 2009 | Epson Stylus Pro 10000 InkJet Printer

Tip

Epson Stylus pro Vista x64 Compatible? YES


Use the driver for the next model up: Epson stylus pro 16000.  A 64 bit driver is available for XPx64 on Epson site:  http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=19156&prodoid=22966689&infoType=Downloads&platform=All Install Printer Driver v5.50 in Vista x64.  The 10000 will print 100%, just like in XP with its own drivers.  Any problems?  I would happy to help you save the time I spent before finding that out.
Good luck!

on Apr 05, 2009 | Epson Stylus Pro 10000 InkJet Printer

1 Answer

We are having problems printing a 10' x 42" banner on our Epson 10000 plotter. We are using a Xante Symphony RIP networked to the Plotter. For some reason it stops printing at approx. 76% (3/4) of...


STEVE you have to print it as a tiled image. there is an update on the epson website for this issue. basicly anything over 90" you have to tile as two images split in half with no border in between if that makes sense. they explain it well in the update. when its something 120" x 36" lets say i run the set up at 36 x 60 then go to the page set up and there should be a box for tie image when you preview it again it shows the tiled image put back to back. you also have to tell it toreverse the print. i use adobe cs2 illustrator and it works well.

May 28, 2011 | Epson Stylus Pro 10000 InkJet Printer

1 Answer

I am having trouble cleaning the heads on my epson 1400. I have done is numerous times, but still do not get a good pattern on the head check. Is there some solution I should squirt down into the head or...


Hi, what I do in these cases when the head printing doesn't work, is to send very complex or full color images to the printer, at the beginning it prints badly because the cloged head, but chances are that the clog dissapear after some time printing

Oct 04, 2010 | Epson Stylus 1400 InkJet Photo Printer

1 Answer

My CX7800 epson printer keeps cutting my images in half


The best thing to do is uninstall the software driver and then reboot your system then install device drive once again and problem should be solved.

Feb 05, 2009 | Epson Stylus CX7800 All-In-One InkJet...

1 Answer

Epson 10000 printer colors not printing


I am gonna gusess there is a break (or poor connection) in one of the lines in the flexable cable that feeds power to the print heads. You might try checking the continuity of each line.

Sep 12, 2008 | Epson Stylus Pro 10000 InkJet Printer

1 Answer

Epson error code 0104


00000104 Auto print head optimization system is all the manual says. No solution given.

Apr 01, 2008 | Epson Stylus Pro 10000 InkJet Printer

Not finding what you are looking for?
Epson Stylus Pro 10000 InkJet Printer Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...