What is a blinking H1 mean? - Frigidaire Refrigerators

1 Answer

Frigidaire

Official Brand Answer 2,267 Answers
Posted on Aug 06, 2014

Frigidaire

Official Brand Answer

Joined: Mar 18, 2014

Answers

2267

Questions

Helped

1289303

Points

2557

Good Morning Friend, that's a great question!

Error code "H1" is actually "HI" meaning that your refrigerator has detected high temperature in freezer compartment. The recommended factory setting should be 0 degrees for the freezer compartment and 37 degrees for the fresh food compartment. Try setting the freezer temperature to "0" or a lower setting and allow 24 hours for the temperature to stabilize. The refrigerator should resume normal operations. I ask that you please follow up with a comment on the post, at your convenience to advise if further troubleshooting is needed or if your refrigerator status has changed successfully. Thank you! - Z

kwjkah Apr 14, 2015

I have reset mine several times and it continues to beep and display hi on the freezer side but appears to be normal on the fridge side

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Altendorf WA80 Sliding Table Saw. It shows an error code E.H1. What does it mean please?

Question edited for clarity, 'make model (what is is)'.
Question moved from Washing Machines category.

E1 Error, but not E.H1.

https://www.google.com/search?q=Altendorf+WA80+error+code+EH1

Manual Errors and Troubleshooting.

https://www.manualslib.com/manual/1583371/Altendorf-Wa-80.html?page=45

..

Read full answer

Feb 13, 2024 • Saws

0helpful

1answer

I have a Frigidaire side by side and the fridge side is flashing h1 and beeping

H1 means the refrigerator or freezer side is to warm
Are the controls set properly?
Is the rear wall of the freezer full of snow?
Is the outside edge of the refrigerator warm or hot to the touch?

Read full answer

Jun 19, 2019 • Frigidaire Refrigerators

0helpful

1answer

How to remove carrier bearing from from prpeller drive shaft on a 2003 H1 Hummer

Do you mean the center support bearing of the two piece driveline?

Read full answer

Sep 20, 2016 • 2003 Hummer H1

0helpful

1answer

What the code h1 means samsung washing machine

H1 on a samsung washer is a heating problem.
You need to check the heater and the control unit and find the fault form there.
If you have a multimeter you can test the heater as it should read about 28 ohms. If faulty then the heater will need to be replaced to cure this.
Check it out and see what you find but the H1 error code is a heating problem.
~~~via just answers

Read full answer

Feb 14, 2016 • Samsung Washing Machines

0helpful

2answers

What does H1 code indicate?

Hello E, I appreciate your post!
I see that your Frigidaire air conditioner is displaying an error code of "H1". I have reviewed the air conditioner and the "H1" error code could be an "HI". The "HI" error code means that the room temperature is above the display range. I would recommend performing a reset on your air conditioner. In order to reset the air conditioner you need to unplug the power cord you can press the reset button and then the test button that should restart your air conditioner. If that does correct your issue I would recommend seeking assistance from a professional technician for proper diagnosis and repair. I hope this information is helpful for you. -Matt

Read full answer

Jan 22, 2016 • Frigidaire FRS12PYS1 12000 BTU Split...

0helpful

1answer

What does H1 mean on display

Hi my window kelvinator air-conditioning is coming up hi or h1 when I have it on heater mode I'm worried something is wrong it's only a few months old is that normal

Read full answer

Feb 07, 2014 • Klimaire Heating & Cooling

1helpful

1answer