Question about Canon Office Equipment & Supplies

1 Answer

How to rectify the continious error in copier IR3300 canon

I am a service engineer
PLEASE GIVE ME SOME STEPS TO SOLVE THE BELOW MENTIONED PROBLEM.
we have a canon copier [IR3300]
FIRST WE SWITCH ON THE MACHINE THE ERROR WITH CODE
E0000733-00001 CAME.THEN WE CLEARED THE ERROR BY CLICKING 2&8 ADDITIONAL FUN
when we took the first print out again the error came back with codeE000003--00000
In the touch panel display the warming up process is very slow and finally the error came as said above.
THANK YOU!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 118 Answers

The last error generated is from the fixing unit you have to clear the error again,but if this error code (Error 003) returned a thorough check on the fixing unit is needed.Or could be the AC supply to the machine is not stable.Go to program mode got o display> analog check the fuser/fixing temp hope this will help

Posted on Jul 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to rectify error code E000002-0000 of canon IR3300


The fuser may need to be replaced. Sometimes that code can be reset in service mode without replacing that part.
Service mode--- Additional functions button, then hold down the 2 & 8 key at the same time, then Additional functions button again gets into the mode. Then select Function, Clear(CLR),Error(ERR) then hit ok and cycle main power. If it resets-great. If not,you need a fuser.

Sep 02, 2014 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...

1 Answer

How to solve the code E00000000 in the Canon IR3300


The error code states that the machine doesn't sense the temperature of the fuser getting hotter. Usually this calls for the fixing film unit to be replaced because the thermistor has gone bad.

Jul 04, 2014 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...

1 Answer

Code Error in cannon ir3300


Hi Abhishek,
Go To Below official Canon Printer Page For Your problem Error Codes Canon iR3300 Still having Problem Then follow Us For Canon Printer Support

Mar 12, 2014 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

Canon IR3300 Hard Disk Error e602 - 003


You need to have 20GB hard disk (IDE) and update the firmware thru parallel cable via SSST

Jan 10, 2014 | Canon Office Equipment & Supplies

2 Answers

I am getting the error E00007-0000 on the display of my Canon iR3300 printer.please advise how to solve the problem


I am getting the error E00007-0000 on the display of my Canon iR3300 printer.please advise how to solve the problem

Aug 29, 2010 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

I am babykaruna from india. i have ir3300 copier machine and in that 1 month ago i got error code 602-003. So I came to know that is an hard disk error. So I replaced new disk and after that my machine...


hi karuna,what you can do is....press * 2 8 *,copier,function,system and HDD clear,ok......ann wait untill the process drop to 0% and switch off your machine,after 5 second on it back,thanks

Jul 05, 2010 | Canon imageRUNNER 3300 All-In-One Laser...

4 Answers

E000064-0000 CANON IR3300 ERROR RESULT


this is pertaining to ckt board controller problem, and we need to coordinate this with canon service for the replacement.

Apr 13, 2010 | Canon imageRUNNER 2200

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2178 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...