Question about Sony Ericsson K800i Cellular Phone

5 Answers

Sony Ericsson K800i

I pressed reset on my Sony Ericsson K800i and all it says is please wait

Posted by on

  • 5 more comments 
  • bobio Feb 10, 2008

    i updated my software through downloadng it, then changed the battery after finishing all the steps, now it won't turn on:(

  • Anonymous Mar 29, 2008

    what did you do

  • zuhairzubeen Apr 14, 2008

    Sony Ericsson K800i Cellular Phone same problem i reseted the phone and after it didnt switched on wat i must do plz

  • Anonymous Jul 19, 2008

    k800i shows please wait after i do master reset...

  • shafie_masou Nov 22, 2008

    C902 shows please wait after i do all reset

  • sunny_g19 Mar 15, 2009

    hi i have the same problem i hit the reset all and when it restarted all it says is please wait. any solutions?

  • Anonymous Mar 21, 2014

    how can i access my cellphone.they are no signal?



5 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

I charge my se k880i, the reslut is the battery gets hot, but not full charge and when i open the phone it will no open, is it true that se phones have no available spareparts and is expensive?

Posted on Dec 12, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Plz plz plz hellp me my mobile SE k800i is not working i pressed master reset and it turned of and turned back on and it said plz wait ive tried evreything plz help thanks you

Posted on Aug 09, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

It's me again, the guy who posted the solution found on the american site.
My problem finally solved. I tried many things, but finally I did it. I was charging the phone with the SIM and the memory card removed. I tried to make the phone start but it said again "please wait" and then I pushed for a few seconds the joystick of the phone. And the phone started. I inserted the SIM and the phone was functioning again.
                               So, good luck!

Posted on Feb 08, 2008

I found this solution on an american site. It didn't work for my phone but maybe you'll be luckyer. So, good luck!
Remove the battery while the phone is powered on and on the please wait screen. Leave it for 30 seconds. Plug the battery back in and remove the SIM and memory card. Connect the charger. Leave it for an hour. Power the phone on with no SIM or memory card.

Posted on Feb 08, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to reprogram my sony ericsson k800i


Obtain the unlock code for your K800i if the phone is locked. You can get the code from an unlocking service, or from the carrier that originally sold the phone.

Turn off the K800i and turn the phone over.

Remove the battery cover by sliding it toward the bottom of the phone. Lift the battery from the bottom and set the battery cover and battery aside.

Remove the old SIM card by sliding it out from under the metal clip. If you have an unlocked K800i, all you need to do is insert the SIM card from your new carrier. Otherwise, leave the SIM out and reinstall the battery and battery cover.

Turn the phone on and wait for it to boot up.

Press left on the navigation pad and press "*" twice, then press the left arrow again. The phone will display "Personalize with MNC2."

Type the unlock code and wait for the phone to reboot.

Turn the phone off and insert the new SIM card.

Jul 22, 2012 | Sony Ericsson K800i Cellular Phone

1 Answer

Unlock my k800i...please

You can unlock your SONY ERICSSON K800i from . This is the safe and reliable online site to purchase accurate unlock codes at affordable cost. The unlocking process is very simple here. You will get easy step by step instructions on unlocking process from here.
Here is the unlocking steps for Sony ericsson K800i,
1 - Switch ON your Sony Ericsson K800i without any SIM Card,
2 - Press the left arrow key/button once,
3 - Press the button * twice,
4 - Press the left arrow key/button once,
5 - The message "Personalize with MNC2" will appear, (or you will have displayed an unlock menu, select the lock you want to unlock)
6 - Enter the Unlock Code.

Mar 11, 2012 | Sony Ericsson K800i Cellular Phone

1 Answer

Cannot get phone off speaker phone sony erricson K800i

go to settings scroll down to master reset in general press select and press reset settings u will not lose any info and ur phone will be reset to norm

Sep 22, 2009 | Sony Ericsson K800i Cellular Phone

1 Answer

Unlock code for Sony Ericsson K800i

I require an unlock code for a sony ericsson k800i. Can you help please?

Jun 18, 2009 | Sony Ericsson K800i Cellular Phone

1 Answer

Sony erricsson k800i

Connect the phone to a computer, remove the memory card (if one is in) and sim card and use the SEUS (Sony Ericsson Update Service) program to try an update on the phone. (you can just search SEUS on google to download), follow the instructions and see if that helps. If not, turn the phone off, hold the 2+5 keys, plug in the USB and wait 15 seconds while still holding 2+5. Once this is done (you will not see any notification on your phone so count to 15) remove the USB, remove and reinsert the battery and power it on. Either of those methods should reset the phone, but recommend attempting the SEUS method first. The 2+5 keys is only intended to be accessed by phone engineers. But just so you know in future, don't click Factory setting next time, click master reset. This will remove everything barring what is on your memory card and sim card.

Feb 11, 2009 | Sony Ericsson K800i Cellular Phone

1 Answer

Sony ericsson k810i

my sony ericsson k800i phone has no menu how do i reset menu please help

Jul 15, 2008 | Sony Ericsson K800i Cellular Phone

1 Answer


take the phone and have the phone reflash

May 13, 2008 | Sony Ericsson K800i Cellular Phone

2 Answers

Please help me...

you need to reflash the firmware on the phone.

Apr 01, 2008 | Sony Ericsson K800i Cellular Phone

1 Answer

Unloking sony ericsson k800i

just press * button then press right top button

Jan 13, 2008 | Sony Ericsson K800i Cellular Phone

Not finding what you are looking for?
Sony Ericsson K800i Cellular Phone Logo

778 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides