Question about Canon FAXPHONE L170 Plain Paper Laser

2 Answers

Where is the fuser on a canon L170? Can I change

Where is the fuser on a canon L170? Can I change it myself? Where can I find the instructions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 28 Answers

It'slocated on the rear of the unit and is a stinker to remove. All of the external covers must be removed and the frame must be separated to remove it. Lots of piecews and parts. Not for beginners.

Posted on Jun 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 86 Answers

The cost of the fusr labouer alone is ~$50-90 USD, plus your labour. You have 2 choices, either replace the entire unit with an all-in-one laser like a Canon MF4250, Brother DCP-7240, or other similar unit for about $140+, or if you're really tight for money, replace the fuser itself but it is a lot of work. This same fuser is also used on the Canon ImageCLASS MF3110, MF5530, MF5550, MF5730, MF5750, and MF5770 units. I was lucky my fuser was fine, but the sleeve was damaged and only cost $20 USD to order through eBay from Australia and then I replaced it myself. Besides, replacing the L170 with an all-in-one would be more beneficial and cheaper in the long run as well for most users.

Posted on Jan 14, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cannon faxphone L170 has dark lines that come through whenever we receive a fax.


Are the faxes from the same person or different people?
(I have to ask, remember I don't know how much knowledge you have.) If yes, it could be on their end.
Does it do this with copies also? If yes, May be dust on the mirror or
something in the printer getting in the way of the laser.{slight possibility].
How many prints are on the printer? Could be a fuser issue.

Jan 15, 2015 | Cannon Canon FAXPHONE L170 - multifunction...

2 Answers

If problem persist contact dealer or service rep turn the main power on e301-0001


This is a fuser error, the fuser replacement for this machine is best done by a technician as there is moderate disassembly involved..

Your local canon warranty agent will be a good place to start.

This same printer engine is used in a few HP printers and multifunctions and the fuser is available from HP as well. Though HP are usually slightly dearer.

If you want to have a go yourself the part number is one of the following, depending on your electrical grid voltage un your part of the world
Canon imageCLASS MF4450 Fuser (Fixing) Unit - 120 Volt
RM1-7576-000
or
Canon imageCLASS MF4450 Fuser (Fixing) Unit - 230 Volt
RM1-7577-000

Oct 26, 2013 | Canon ImageCLASS MF4450

1 Answer

Canon FAX-L170 error E000-0000


canon fax-L170 trun the main power on.
E000-0000

Oct 24, 2013 | Canon L170 All-In-One Laser Printer

1 Answer

There is a smudged side on the fax when it comes across. I have changed the toner and shaken the toner up the smudge still comes back in the same place on the fax


If this smudge is showing up on the faxes you are RECEIVING and you have changed the toner then the next most likely cause is a fuser problem. This is especially true if the smudged area feels gritty or the toner rubs off the page in the smudged area. If this is the case then you need to replace the fusing unit or have a local repair place replace the fuser "film" on your fuser unit.
Good Luck and Thank You for using Fixya.

May 11, 2011 | Canon FAXPHONE L170 Plain Paper Laser

1 Answer

Canon Faxphone L170 prints A vertical smudge streak down whole page when printing?


It might be the fuser film thats busted,i recon the u have changed the cart?Does it make a noise when u print?

Jan 31, 2010 | Canon FAXPHONE L170 Plain Paper Laser

1 Answer

Volume on Canon Faxphone L170


By pressing the menu button left of the LCD display,scroll to usersettings press ok.Scroll to volume settings press ok and change volume levels there.

Dec 11, 2009 | Canon FAXPHONE L170 Plain Paper Laser

1 Answer

We have a Canon Faxphone L170. Someone sent a fax


On the controll panel there is a diamond shape picture with a eye in it.press that bottom and clear the fax that you received.There is no other way.You will have to phone the sender and ask them to change the papersize settings on the fax machine.

Dec 08, 2009 | Canon FAXPHONE L170 Plain Paper Laser

1 Answer

Change the time date and year


This is a link to Canon FaxPhone L170 Basic Settings Guide. Look on page 3-4 in Registering Information section.
http://gdlp01.c-wss.com/gds/0900006140/FAXPHONE_L170_Basic_Guide_EN.pdf

Oct 08, 2009 | Canon FAXPHONE L170 Plain Paper Laser

1 Answer

How do you remove a canon l170 cartridge properly


I don't know this off the top of my head but those wonderful types at Canon will show you. Go to the Canon site, select 'support' and get the manual for your printer (it may be a pdf file in which case you'll need to download the free Adobe pdf reader) which will explain and probably have drawings of how to change the cartridges.
Best of luck
AlB

Jul 26, 2009 | Canon L170 All-In-One Laser Printer

Not finding what you are looking for?
Canon FAXPHONE L170 Plain Paper Laser Logo

442 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1975 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...