A red light flashing with clean filter

Question edited for clarity, dreadful spelling and typos. :>D
Question moved from Televisions to Air Purifiers.

Your air filter is dirty and needs cleaning.

Afloia Air Purifier Blinking Red - Repair, Care and ...

https://plentifulair.com > afloia-air-purifier-blinking-red...

A flashing red light in all Afloia air purifiers indicates that the air filter needs to be replaced. Typically, in these air purifiers, the red light turns on ...
‎Why is My Afloia Air Purifier... · ‎How to Replace the Air Filter in...

..

Switch it off, count to 50, switch back on.

'make model (what it is)' in all questions, first 3 words please.

Wiping it off won't clean the filter. I submerse mine in hot soapy water ( oxiclean w/any favorite multipurpose liquid cleaner.Let it air dry completely before placing it back in unit.I have tried the dishwasher method and it didn't clean it.I also thoroughly wash all crevices of the unit.If red light doesn't go off, reclean the filter(s). It has all ways worked for me.

Hello,

So after you have replaced the V5 Cell Filter in the IQ Air, here are the steps you'll need to follow in order to reset the filter indicators:

• At the main menu on the control panel, push the menu button 7 times until you get to the screen that says Replace Filter.
• At the Replace Filter screen, press and hold the Enter Key until the cursor appears, and is flashing.
• Press the UP arrow button on the keypad until you get to the V5 Cell Filter.
• At the V5 Cell Filter screen press the Enter Key to confirm your filter reset selection. This will turn the corresponding filter LED to a flashing red light. IQAir requires that your reconfirm the filter selection to prevent inadvertently resetting the wrong filter. If you chose the wrong filter, press the menu key after pressing the enter the first time to disregard the filter change command.
  
• To confirm the filter reset selection, press enter a second time, which will reset the filter life, and reset the filter hours.

You can repeat these instructions for the other two filters on your machine when it's time. Here's a link to the product manual for your IQ Air Health Pro Plus which will give you the same instructions, as well as other maintenance instructions.

http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/IQAir-healthpro-plus-owners-manual.pdf

I hope that this information was helpful to you. If you were able to reset your filter, please be kind and rate the repair as helpful by clicking the thumbs up icons in the top of my repair. This is what really keeps Fixya experts continue leaving free repair solutions. Thank you very much,

Chris J.
GoVacuum

I read on another site to hold the power button down for 5 seconds. Dont know what the blue light is but this stopped it from flashing!

I cleaned the filters as well earlier and the red filter light still blincked to clean the filters. Then I pushed the power button for about 10 seconds continously and then turned it on and the light turned off.

The red light indicates a plugged filter. Replace the filters plug the machine in and get a paper clip. Streighten out the clip and put it through the tiny hole in the top. You'll feel it push a switch that will give a click you can feel. Keep holding the clip wire down for several seconds. When the red flashes remove the clip wire. The light will stay off if the filter is clean.

Here is the link to the user manual; http://www.filterqueen.com/pdf/defender.pdf The red light indicates a filter needs replacing, see page 6 of the manual (page 9 of the pdf file) If filters have been replaced and the light still flashes, then the reset procedure (described on the same page) should work. If still flashing then there is a more serious, but probably fixable fault. Hope this helps - ask again if you need more info :)

You must press both the timer and reset buttons together had same prob Ezio