Pride Mobility Jazzy 1143 Power Chair - Used Electric Wheelchairs Logo

Related Topics:

A
Anonymous Posted on Aug 01, 2014

Jazzy 1143 Why won't the Charging circuit not disengage?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The right side is disengaging. It goes around in circles to the right.

Go to Pride Mobility Products Corp Basic Troubleshooting Instructions This page can assist you. There is also a lever to disengage the wheels that allow the chair to be rolled when not powered. Look at your manual to find the location.
0helpful
1answer

Jazzy 1107 power chair won't move

3 flashes indicate that there is a short circuit to the left motor and battery connection. Check wiring and connections
0helpful
1answer
0helpful
1answer

Why are the lights blinking and it won't go

read manual,lights flash when in security mode,everyt model has a unlock procedure with the buttons on the joystick control.
0helpful
1answer

Where is the freewheel lever located on the jazzy 1113?

Original Jazzy Select has push-down levers on each side behind powered wheels. These manually disengage the brakes on each motor individually. They are about 6 inches long and push down an inch or so. I don;t know about other more current models, The 2 smaller wires to each motor disengage the brake when given power (24 volt, I think). The 2 larger wires run the motor.
1helpful
2answers

1143 jazzy wheel chair new batterys @ new charger still not charging

With a new charger and new batteries there can only be one other problem assuming all the wiring is connected properly. There is a 7.5 Amp in-line fuse hidden in a fuse holder off the charging harness. This fuse may have blown. I usually check this fuse first since it is usually the culprit and most difficult item to locate under the back cover. In rare cases the ammeter burns open and will cause the unit not to charge. After checking the fuse you can jumper one or both these items to see if it will charge and then purchase new parts. Hope this helps.
0helpful
1answer

I have a Pride 1143 Jazzy Electric wheel chair and the controller is constantly flashing. This happened after I drove into my van and locked into the e-zloc. My husband sid I drove in too fast and caused...

Hi

Rapid flash of lights indicates a fault in the VSI or the electrical system. You need to refer to " VSI Error Codes" on page#32 of this User Manual:

Pride 1143 Jazzy Electric wheel chair User Manual

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee
1helpful
1answer

Go to turn the power on the controller of a Jazzy 1143. The lights on the controller flash and no power goees to the chair. Have checked all connections and still nothing works.

Flashing lights indicates a fault. Here' the users manual which contains the fault codes for the flashing lights. Repost with more info re: the fault codes. Good Luck.
http://www.pridemobility.com/pdf/Owners_Manuals/US_Jazzy/US_Jazzy_1143_om.pdf

Also, make sure the charger is not plugged into the chair.
Not finding what you are looking for?

64 views

Ask a Question

Usually answered in minutes!

Top Pride Mobility Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1480 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39381 Answers

Are you a Pride Mobility Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...