Question about Casio Parts Cash Register PC Desktop

1 Answer

FUnction buttons on a casio te3000


I have managed to programme the till but when i programme paid out and recieved on account functions, although it says it has accepted the code, the fuction will not work any ideas???

Posted by on

  • christine357 Jul 01, 2009

    PGM 4 subtotal (code for function) button to be applied to then subtotal... and system says it has accepted the code.. when tryin to use the rec on acc i press the amount then the programmed button and it just bleeps and goes red. Occasionaly It will accept an amount but i have never had it accept over 99.00.

    The paid out has only worked with a 1.00 and i cant get it to work twice in a row... i press 100then the paid out button and again it bleeps and screen goes red?????



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

These functions usually require no setup at all. Can you tell me what you did during programming, and also, how you are trying to use them in REG mode. Please detail all button presses so i can be sure.


Posted on Jun 30, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Zanussi dishwasher ZDF601M 1 in 3 red light comes on and programme doesn't work through

26269906-aipk5px1bmfkdpsmrgevaqwn-3-0.jpg "3 in 1" function
This appliance is equipped with the "3 in 1" function, that
allows the use of the "3 in 1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the "3 in 1" function before the set of a washing
Once this option is selected (indicator light illuminated) it will
remain active also for the following washing programmes.
With the use of the "3 in 1" function, the cycle durations may
change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.
NOTE: Once the programme is running, the "3 in 1" function
can NO longer be changed. If you want to exclude the "3 in 1"
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the "3 in 1"
In this case you have to set a washing programme (and
options) again.

Activation/deactivation of the "3 in 1" function
(The dishwasher must be switched off)

1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).If a programme button indicator light is on, this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3
for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode.

2. Press simultaneously function buttons 2 and 3, until the
indicator lights of function buttons 1, 2, 3 and 4 start

3. Press function button 4, the indicator lights of function
buttons 1, 2 and 3 turn off while the indicator light of function
button 4 goes on flashing.

4. Press function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the "3 in 1" function is active.
To deactivate the function press function button 4 again, the
indicator light turns off.

5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting


Aug 29, 2016 | Zanussi Dishwashers

1 Answer

Casio indw over ?

Your programmer has set a drawer limit and the machine is telling you that the cash limit has been reached. Your manager should now clear the drawer and reset the function.

Dec 28, 2011 | Casio Parts Cash Register PC Desktop

3 Answers

How do i programme prices on the casio SE-S300 till?

Turn key to Program 1 SUBTOTAL price (no decimal point) Item button SUBTOTAL
The Se-S300 manual can be found here:

Jan 08, 2011 | Casio Parts Cash Register PC Desktop

1 Answer

How do you set it

Press the mode button (bottom left button ) till you are on the function you want to set

Next press adjust button ( the top left button)

Press Mode button again till you get to the desired hour, minute, second, or day section to set.

Press bottom right button to move time or date forward.

Oct 18, 2010 | Casio DW290 1V Classic Alarm Chronograph...

2 Answers

I have managed to change my mode button to menu, and now i cant get it back to the mode button because i cant get into mode and reprogram that particular button, please help!!1

Mode button is very important to change the mode.If you have delete it by mistake then you have to use Casio software- cv-10, cv11 or cv33 to download all the programme and initialize qt-6000 with initialization method and reload individual programmes which you need and don't load function keys through your saved programme. Then configure the function keys manually in programm-4

Apr 29, 2010 | Casio QT 6000 Point of Sale Terminal

1 Answer

Sending and recieving messages

check with your carrier; you may not have paid for or, have used up your account

Sep 10, 2009 | AT&T Blackberry Curve 8300 Smartphone

1 Answer

The calculator wont recognise the blue funtion buttons (1-6)

Clear the ram:
1. Press [MENU]2. Press [tan] (MEM)3. Select RESET4. [F1] (yes)

May 14, 2009 | Casio CFX-9850G Plus Calculator

3 Answers

Lost how to program (car charge ) ( car paid)

Can you please tell me the brand and model of your machine?

Nov 14, 2008 | Casio Parts Cash Register PC Desktop

3 Answers

Casio fx-9860g ............ how to do percent operation

[OPTN][LIST] scroll right till you find %. Press the function first then the number. It gives you the percent.
Hope it helps.

Aug 29, 2008 | Casio FX-9860G Graphic Calculator

1 Answer

Have lost instructions for masterplug 4 in 1 remote tvrc4n

hi, the method to perform an auto scan.
Generally you can press the function button you want to programme, then hold SETUP down till the red led flashes twice. Then tap in 991. Now press the power button, followed by the function button that you are trying to set, repeatedly. When your piece of equipment turns off, press and hold the function button again. You should be all set.

May 04, 2008 | Televison & Video

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts


Level 3 Expert

1780 Answers


Level 1 Expert

34 Answers


Level 1 Expert

43 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides