Question about Computers & Internet

1 Answer

My computer won't respond

I did not touch anything on the computer and was doing research for a paper and left it for a second and when I returned the screen was black and the power lights were blinking. Usually when this happens I touch the touch pad and it'll come back on but this time it didn't so I tried to turn the power on and off and I also tried to turn the visuals on and off and it did not respond. Every time I restart it pressing the power button it comes on the same way and will not show anything I do not know what the problem is or how to resolve it Please Help..

Posted by on

  • 6 more comments 
  • Heang Ponn Nov 08, 2007

    when i turn on my dell laptop it usually start for a few minute or untill 15 minute but after that soon it turn off. Every time i can turn it on but it still turn off by itself.

  • mtbguy Dec 05, 2007

    exact same

  • lilishefki Mar 22, 2008

    my computer just shut down and now im tring to restarted or recover it it wont work it talks something about purple code

  • Anonymous Apr 01, 2008

    I have the same problem with my HP 6310

  • Anonymous May 18, 2008

    I have a Dell Inspiron 6400 vista. I tried to power it up, the power lights lits up but goes off immediately after. The screen is blank all through this process

  • tfuentes20 Jul 29, 2008

    I was charging up my laptop one day becuase the battery died out since I was doing a 20 page report..Then once it was finish I went to turn it on and it wont turn on the screen went black ever since.

  • cutiepieal Nov 02, 2008

    i opened my computer and the screen is completely black it wont show me anything...the power is on and the fan is running but no screen...

  • devilnaruto1 Apr 15, 2009

    when i turn my computer on it wont start anything. when i try to push the button to turn it off it wont respond. i have to pull out the plug just to turn it off. someone help me plzzz



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 46 Answers

Try enter em Safe Mode if u can enter, then u have malware installed on ur computer. Try to use this software : Spybot, AVG Anti Spyware, Ad-adware, run scan to see if there is some malicious software installed.

Posted on Nov 08, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Paper white will not respond to touch.

always like to refer to Amazon help whenever possible. I copied their directions for this. Even if your's is not 5th gen it will work. You can also check specific info for your model by logging into Click help, then device help, click on you device and look through the info available.
Many issues with your Kindle, such as a frozen screen or issues with downloading content, can be solved by restarting your device. Help for Kindle Paperwhite (5th Generation).
Press and hold the Power button for seven seconds until the Power dialog box appears, and then tap Restart. Note: If the Power dialog box doesn't appear, press and hold the Power button for a full 40 seconds until your device restarts.

Nov 29, 2016 | Amazon Kindle Paperwhite

1 Answer

What is wrong?

Outside or returning for warranty repairs or replacement, you can try powering off unit and disconnect power battery connection and reconnecting.

Apr 28, 2014 | Cell Phones

1 Answer

Tablet reset

Hi, If you are in your tablet, touch "settings" they should show up on the left side of your screen. Scroll down until you see "Reset to Default tap that and it will take you to another screen asking you if you really want to do that, make your selection and Zeki will automatically do it's thing and erase everything, shutdown and power up again. This should be the same for all Zeki Tablets.

Jun 10, 2013 | Shopnbc Zeki 10" 8GB Android 4.0 Ice Cream...

1 Answer

Touch Screen wont work?

Return it haha. Its broken. If its not working after restarting it or after hitting it a few times or something then its broke

May 03, 2013 | T-Mobile Concord

1 Answer

Welcome to LG-LG 855 won't respond


Mar 11, 2012 | Cell Phones

2 Answers

The touch screen is frozen and won't respond to anything. Is there a reset?

Try this, unplug it for about 10-15 second. All these modern appliances use microprocessors for control. Unplug is doing hard shut down on your computer. stewbison

Aug 20, 2011 | Samsung RFG297AARS (285 cu ft) Bottom...

1 Answer

Touch screen will not respond

I would try doing a reset on the unit before anything else.

Take your SD CARD out before doing this tho.
Use a straightened paper clip, or something similar, to push the reset button for 15 seconds. ushally located on the bottome of the unit.
then after rest try to see if your touch screen is now enabled

Give that a go and if nothing I will look into this issue more for you.

If you are happy and satisfied with this awnser please thumbs up or even better write a Testimonial.

Jun 11, 2011 | Tomtom ONE GPS Receiver

1 Answer

How do I have printer switch from empty paper tray 1 to the full 550 paper tray 2

Hi. You need to do tray linking. When one linked tray is empty, paper feeds from the next linked tray. The size and type settings for all trays must be set from the Paper Menu. To set the paper type or size:
1. On the home screen, touch Menu button
2. Touch Paper Menu
3. Touch Paper Size/Type.
Note: To link the multipurpose feeder, Configure MP must be set to Cassette in order for MP Feeder Size or MP
Feeder Type to appear as a menu item.
4. Touch the right or left arrows to select the same size paper from all paper sources to be linked.
5. Touch the right or left arrows to select the same type paper from all paper sources to be linked.
Note: When the Size and Type settings are the same for any trays, the trays are automatically linked.
6. Touch Submit.
Submitting changes appears.
7. Touch Home to return to the home screen.
Hope this helps.

Mar 16, 2010 | Lexmark X464DE Mono Laser MFP, 38ppm A4...

1 Answer

The paper pick up won't work manually and the green is amber

In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 times.......... Now Insert the Ordinary Papers onto the Printer and insert both the catridges and Turn on the Printer...........

Good Luck...........

Apr 04, 2009 | Office Equipment & Supplies

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

2,257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides