Question about HP Photosmart C5180 All-In-One InkJet Printer

1 Answer

I have an HP C5180 that is showing an message Error 0xc18a0301, Ink failure. Tried the HP fix of removing cartridges, turn off/on nothing work. Any ideas

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

Hi I found this I know your error not in here but it may work for It worth a try nothing to lose and it may work. I know your error code is not in this but it some times it clean the error with this type of error number you can gave it a go try not harm it Error code: 0xc18a0201, 0xc18a0206, 0xc18a0306, 0xc18a030a, 0xd0620130, 0x887dd03a, 0xd05d010d, 0xf0af8004, 0xc19ac3ff, 0xc18a050...

Reset the product:
1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I just replaced every ink cartridge for me hp c5180 and the caption is still coming up "ink system failure. error: 0xc18a0206". What do I do next so I can just print?


Hi there you can try this may work,

Your error 0xc18a0206
Solution one: Reset the product
1. Without turning off the product, disconnect the USB cable from the rear of the product.
1. Remove the cartridges from the product.
2. Wait for the 'Insert Cartridges ' message to display on the control panel.
3. Disconnect the power cord from the back of the product.
4. Wait 60 seconds.
5. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
6. Reinsert the cartridges, and then close any open doors on the product.
7. If you receive a prompt to print a calibration page, do so.
8. Reconnect the USB cable to the rear of the product, and then try printing again.
9. If you have completed all the steps listed above and are still experiencing a problem, you need to service the product.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 10, 2010 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

HP c6150 all in one error message Oxc19acff Ink System Failure. Replaced Yellow ink cartridge an still receive error.


Turn off the machine using the power button, unplug the power cord from the back of the machine, remove the ink cartridges, wait 2 min, plug the power cord back in, press the power button to turn on the machine, wait until the printer prompts that the ink cartridges are missing, then replace the ink cartridges. If this doesn't fix the problem you may have to re-prime ink through the system. There are instructions for doing this at http://www.ccl-la.com/blog/index.php/hp-photosmart-ink-system-failure-1/.

Jan 30, 2010 | HP Photosmart C5180 All-In-One InkJet...

2 Answers

My HP Photosmart C5180 printer keeps coming up with an error message 'Ink System Failure. Does anybody know what is needed to solve the problem.


Hello,

The "Ink System Failure" error is causes by air in the ink feed tubes. We have a step by step guide purging the air from the feed tubes posted on our web site. Go to our site at: www.ccl-la.com, click on the printer repair link and then the HP link. Follow the steps and you should be back printing in no time at all.

I hope this helps, If so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

Nov 01, 2009 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Incompatable Ink Cartridge HP C4480


Cartridge failed try another new one.
Yea it is new and should be good but they are machines and are prone to failure too.

Jul 24, 2009 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Error 0xc18a0301


Hello Alina,

Please Click here and follow the instructions to resolve this issue.

Regards
laxman

May 26, 2009 | HP Photosmart C7280 Printer

2 Answers

Error 0xc18a0301


Error: 0xc18a0301 fix from HP tech support:

Let us perform some steps to isolate the issue and find a fix for it.
Please perform the following steps and let me know the message that will be displayed on the printer.
A. - Press and hold the “*” key.
B. - Press the “#” key and release both keys.
Display should say “Enter Special Key Combo”
C. - Press and release in sequence the “1”, “2” and “3” buttons.

Screen says "support" R0631M

Press and release the right arrow button until the display says “System Configuration Menu”.
Press and release the “OK” button.
Display should say “Hardware failure status”. If not there already, Arrow Key over to “Hardware failure status”,
Press and release the “OK” button.
Display should say “Hardware failure status: Clear. Press OK to clear”.

Press and release the “OK” Button. Message changes to “Hardware failure status Cleared. Press Cancel to continue”.

Press and release the “CANCEL” button as many times as necessary, so that, either the “Welcome to Photosmart Express” screen appears, or, the “Ink System Failure” screen appears. PLEASE DO NOT TRY TO PRINT AT THIS STAGE.

Using the Power Button, turn the unit OFF and unplug the power cable from back of the printer and wall outlet.


Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first and then into the back of the printer

turn the unit on. The printer may display message “USE POWER BUTTON TO SHUTDOWN THE PRINTER” followed by “PRESS OK TO CONTINUE”. Press OK. The Printer will start the “ONE TIME INK INITIALIZATION PROCESS”. Allow this process to complete and do not interrupt. Once the initialization process is complete, the printer will print out a Diagnostic Page.

Is the error message still being displayed on the printer?


Print a self test page to check the functionality of the printer.
Press Setup menu on the All-in-One then scroll using the arrow key and select Print Report then select Self Test Report.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


May 21, 2009 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Ink System Failure HP C5180


IssueAn 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution
Press the On button to turn the printer off. 
Unplug the power cord from the back of the printer.
Remove all the ink cartridges.
Wait two minutes.
Plug the power cord into the back of the printer.
Press the On button to turn the printer on. 
Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved.
If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

Jan 23, 2009 | HP Photosmart C6180 All-In-One InkJet...

2 Answers

Help!!!


90% of 'Ink System Failure' issue is caused by using non-hp inks...for you printer c5180,c6280 there is an assert that you can do.

1.Press and hold at the same time, 'Red Eye Removal' button and 'Print Photos'.
2.You will then see 'Enter special key combo'.
3.Press in sequence, Red Eye Removal' and 'Print Photos'.and then Red Eye Removal'
4.Using the right arrow button look for 'System Configuration' and then Press OK
5.Look for 'Hardware Failure Status' and then press Ok.
6.Follow the onscreen instructions and just press OK.
7.If you can see 'Hardware Failure Status Cleared, press cancel to continue...' Press Cancel as many times as necessary so that either 'Welcome to PHotosmart...or the same message.
8.Turn Off you unit Off and ON.
9.This should fix the issue because if not, you need to call HP to have your printer replaced if IN-WARRANTY

Sep 08, 2008 | HP Photosmart C5180 All-In-One InkJet...

Not finding what you are looking for?
HP Photosmart C5180 All-In-One InkJet Printer Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...