Question about Westinghouse LTV-32w1 32 in. HD-Ready LCD Television

2 Answers

Why did the TV remote input stop working?

TV remote input stopped working. I have had this TV for almost 16 months. Everything worked fine, until recently the remote stopped working. I changed the batteries, but that did not solve the problem. The universal remote which worked with the TV no longer works with it either, so I know do not think the issue is the Westinghouse remote. I assume it is the signal receiver. What can I do?

Posted by on

  • Anonymous Jan 03, 2008

    I have the same problem. The remote stopped working, as well as the universal sat remote I used.  So I know it is not the remote, but the TV signal receiver.


    It just stopped with no indication of failure.

  • mforsell Feb 16, 2009

    i have the same problem with my new westinghouse 32" tv. remote and universal just stopped working. have a duplicate older tv elsewhere in the house and the remote works fine with it so it is not a remote problem. How do I get the remote working again on the newer tv?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It worked for me too. Thanks

Posted on Mar 31, 2010

Ad

Unplug the tv and plug it back in. This worked for me.

Posted on Jan 06, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV remote will stop working sometimes if Linksys wireless router is onExample: Volume & Channel up/down buttons. Has anyone else experienced this problem and does anyone have suggestions to fix?


Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Jul 15, 2015 | Vizio 55"""" E552VLE 1080p 120Hz...

1 Answer

Sharp lcd tv will not respond to remote control


You are paying fios good bucks for service so let them earn it by getting your system to work with their gear as intended.
Make sense? It is THEIR not yours. U did not have this issue with the other company!

Sep 06, 2017 | Sharp AQUOS LC-32SB21U 32 in. LCD TV

1 Answer

My remote control stops working every few months or so, then starts working again. My warranty goes out this month. Just have a service call and the tech left me another remote, but I'm afraid this will...


The remote interface of the TV died on mine, it was intermittent then it stopped completely. Remote control is fine, it's the remote sensor in the TV itself.

Mar 09, 2011 | LG 50PC3D 50 in. Plasma Television

2 Answers

Direct TV remote "tv input" button won't work with my Sony TV


I came across this looking for a similar solution for my Samsung TV, and I found the solution on ehow.com. Apparently after you program the remote for your TV you have to hold mute and select again until it flashes twice then put in 960 to make the remote control TV input too. Note you're remote should be in TV mode while you do this. It seems silly that the DirectTV guy wouldn't do this when programming the remote.

Aug 17, 2009 | Directv RC-64 Remote Control

1 Answer

TV locks up the SKYdigibox


unplug tv for 1 mins,re-plug it back in!

Feb 26, 2009 | Televison & Video

1 Answer

Denon avr-1907 sound from TV stopped working


Help with hooking PS3 to a Denon Receiver. It worked before, but I had to move everything to a different location and when I hooked it back up the PS3 has sound but no picture. I have it hooked directly to the receiver with and HDMI cable (the receiver is hooked up to our cable box which is directly hooked to the tv via HDMI cable).

Jan 03, 2009 | Denon AVR-1907 Receiver

2 Answers

Remote control stopped working


Hey. I paid the $20 for the expert advice and (I feel such a fool) I just had to unplug the tv and plug it in again for everything to work!

Martin000

May 11, 2008 | Philips 37PF7320A 37 in. HD-Ready LCD...

Not finding what you are looking for?
Westinghouse LTV-32w1 32 in. HD-Ready LCD Television Logo

1,677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75169 Answers

Jaime Hernandez

Level 3 Expert

2334 Answers

Cindy Wells

Level 3 Expert

5341 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...