Question about E-Machines eMachines W2686 PC Desktop
I've check the power supply cord and it still work but when I try to turn on the computer it will not come on
Normally it is the power supply at fault; find a friend with a spare power supply and have them bypass yours and test to see if it the problem. Also, smell for burnt electronics - look for leaking capacitors, etc...pay a neighbor or pay best buy!
Posted on Jun 30, 2009
Reseat the power cord that is on the motherboard. Sometimes if you pull that cord from the motherboard (be careful there is a clip that is holding it to the board) wait about 1 minute then plug the cable back onto the motherboard your machine will possibly turn on. Also unplug your power supply cord from the computer when you do this. The other issue could be that the battery on the motherboard is dead.
I’m happy to assist further over the phone at https://www.6ya.com/expert/barbara_87cfe34e34050f26
Posted on Jun 30, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: eMachine T2824 does not turn on
There are just too many eMachine models to be familiar with every one, however, as a preliminary inspection, remove the side panel, and turn the computer on to see if you see a green "Health" light. This will give you an initial clue as to how to pursue the problem. eMachines have historically had power supply problems. If you do not see a green health light on the motherboard, then your power supply is defective. A power supply supplies various voltages + - 5V, + - 12V ,etc. A power supply can be easily tested by a local shop with the proper test equipment. You might start there if you are a DIY! Short of that, you can purchase a power supply for under $65.00.
Posted on Nov 20, 2008
Is your new SUP has the same specs with the old SUP? like voltage output, WATTS etc....
Usually motherboards have a led light in it that will light up when its connected on SUP.
regarding the wire placements for power and led connectors, you can view it in your users manual.
Posted on Feb 05, 2009
I will assume that you have not messed with anything and it just stopped working. So try these steps:
1) Check the power plug, make sure it is plugged into the wall and also into the back of the computer.
2) Check to see that the switch is "On" on the back of the power supply if there is one.
3) Take the case off and look at the power button, try to press it without the case on, perhaps the power button is broken. If that doesnt work try and see if the little wires on the back of the power button are connect and bot pushed off.
4) Check the cables to the power supply, ensure they are connected to the motherboard and not disconnnected.
5) If all of the above do not work, take a power supply from another system and plug it in to *********** board, see if the computer boots normaly then. If that works you can assume the power supply is shot.
Let me know if there is anything else.
Posted on Jul 12, 2010
Tips for a great answer:
Mar 19, 2013 | Computers & Internet
Oct 19, 2010 | E-Machines eMachines Desktop PC
Jul 09, 2010 | E-Machines eMachines Desktop PC
Jan 21, 2010 | E-Machines eMachines Refurbished EMA...
Dec 31, 2009 | E-Machines eMachines Refurbished EMA...
Oct 04, 2009 | eMachines E620-5885 Notebook
Sep 18, 2009 | E-Machines Emachine T5026 power supply **...
Sep 05, 2009 | E-Machines REXUS SPE-300 ATX 300W P4 Power...
Aug 30, 2009 | E-Machines eMachines Desktop PC
Mar 31, 2009 | E-Machines Emachine T5026 power supply **...
154 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: