Question about Bushnell Yardage Pro 500 Rangefinder

1 Answer

Bushnell Medalist stopped working

My battery got low and I replaced it. Now I get nothing in my screen. I dont know if a wire got loose or a bad connection, but it doesnt even say "lob" or have the little dashes there or the flag at the bottom left. I have tried several batteries and the thing just wont work. Thanks,

Clay

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 133 Answers

Clay,

It sounds like the 9volt battery connector has a broken wire. You maybe able to have it resoldered or send it to Bushnell for repair. If you take upon yourself to open the unit up....You could void your warranty. If it is under 2 years old from the date of purchase, its under warranty. Call Bushnell at 800.423.3537 and ask them. They might have you send it in and replace the unit with a new one.

mtg

rate!


Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

I have lost my battery cover anyone know where to get one Thanks


The battery door for my Pinseeker 1500 is lost. Need a new one but cannot find anyone who will sell parts. Any help out there?

on May 17, 2010 | Bushnell PinSeeker 1500 20-5103...

1 Answer

Bushneel Pinseeker bad connection


for this you will need to send the unit into their repair at 8500 marshall drive lenexa ks 66214 4-6 week turnaround and put your name address and telephone number inside the package. if there is a cost they will send an estimate.

Mar 23, 2010 | Bushnell Golf Medalist BUU0055 Rangefinder

1 Answer

Nedd battery cover for Bushnell Medalist rangefinder


call Bushnell at 800.423.3537
ask them for one...about 7-8 bucks
mtg

Oct 08, 2009 | Bushnell Optics

1 Answer

Need a new cap for the battery compartment.


call bushnell at 800-423-3537 option one and you should be able to order this part. the model it apears that you have is 20-1354.

Sep 26, 2009 | Bushnell Golf Medalist BUU0055 Rangefinder

1 Answer

On my yardage pro compact 600 my info on the screen is dim? is there an ajustment? battery seems to be fine... i had a different bushnell that would go dim when the battery was dead but also have a little...


If sorry to say that your Compact 600 is on its last legs. Bushnell doesn't service them anymore. I think your unit is about 7-10 years old. Parts are not available. Think about some newer technology. "Pinseeker" technology is the best!!!! They have three models with this: "The Medalist", The"Tour V2", and the all mighty "Pinseeker 1600" Prices start at $195 through $285 from the service center.Call 800.423.3537 and talk to them.......


mr tech geek!

Jul 15, 2009 | Bushnell Optics

1 Answer

I have a Bushnell Medalist Pinseeker golf laser rangefinder. I recently replaced the battery with a 9V Duracell Alkaline, and now the Pinseeker mode is not working (it will not sight different targets) and...


The "Pinseeker" mode is a automatic mode Sometimes it uses it, somtimes it doesn't. It is designed to recognize a vertical shaft. (Pin) Now IF you hold the power button down....you can see if all of the LCD segments are burning. If the segments fade out later in the game.... (bad LCD) Make sure the Pinseeker mode it on...(flag symbol on the left) Hit the button on the side if you need to. IF it still doesn't lock on to pins, it needs an alignment.

MTG

Jun 23, 2009 | Bushnell Golf Medalist BUU0055 Rangefinder

1 Answer

Bushnell 400 rangefinder won't show yardage stuck on 888


If the unit is stuck on 1888 the circuit board inside has lost its programming. Sounds like its about 10+ years old. Bushnell doesn't work on them anymore. If you use it for hunting I would suggest the Scout 1000 with ARC compensation, if you use it for golf look at the Medalist. You can see them both at bushnell.com

The hunting rangefinder will run about 250 bucks
The golf rangefinder will run about 220 bucks.

Both use advanced target locking systems.

mtg

Jun 01, 2009 | Bushnell Yardage Pro 500 Rangefinder

1 Answer

Bushnell medalist pinseeker rangerfinder


You must use alkaline batteries only.....Heavy duty batteries dont generate enough current to power the laser properly...

mtg

Aug 23, 2008 | Bushnell Medalist Rangefinder

Not finding what you are looking for?
Bushnell Yardage Pro 500 Rangefinder Logo

Related Topics:

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Optics Experts

Joe Lalumia aka...
Joe Lalumia aka...

Level 3 Expert

3186 Answers

kakima

Level 3 Expert

102366 Answers

Mark Campeau

Level 1 Expert

44 Answers

Are you a Bushnell Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...