Question about Uniden Cordless Phone

3 Answers

GE 5.8 GHz Model No: 25825GE3-A

The problem is that the handsets (there are two) say that they need to be registered. I can get one to register but the other one keeps saying that it failed. I tried a number of times but it keeps telling me that registration has failed for handset number 2. Any help would be appreciated.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers
Re: GE 5.8 GHz Model No: 25825GE3-A

Try this.. press the prog/mute button. It will ask you to press the page button on the base Press the page button and the handset will say it has to have a name - press the prog.mute button and it will name the handset - not sure if you need to press it 2x for the 2nd handset you have

Posted on Feb 20, 2009

Re: GE 5.8 GHz Model No: 25825GE3-A - Uniden Cordless Phone Phones


Posted on Feb 17, 2008

Re: GE 5.8 GHz Model No: 25825GE3-A

Need manual for ge 25825GE3-A

Posted on Feb 17, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Handset display says "Connecting" I can't deregister. How can I get the handset to display "not registered"?

The procedures to deregister are, of course, specific
to each make and model number of cordless phone.
All of them are a LOT more involved than simply
removing the battery.

For some AT&T, VTech, Uniden, & GE model numbers
you might try the following:
For many AT&T models it is simple:
1. When the handset says "Connecting..."
enter *331734 [menu]
it will soon (chirp) and display "Not registered"
For many VTech models it is a bit more involved:
1. Start by taking off the battery compartment cover.
2. press [menu]
3. scroll up/down to "Settings"
4. enter * 7 8 9 0 #
5. if display reads "Test Base",
scroll to "Test Handset", press [select]
scroll to "next page", press [select]
6. scroll to "Register Clear?", press [select]
7. display asks "Confirm?" or "Register Clear??",
press [select]
8. display reads "Ok" (chirps), press [ off ]

(this is why the cover is off)
10. Wait ~30 seconds, re-connect the battery &
replace the cover
11. display reads "Not Registered"
For many Uniden models:
1. Press and hold the [END] and [ # ] keys at the
same time, after a few seconds the display reads
2. "System Reset, Deregister Handset"
3. scroll to "... Base Unavailable"
press [SELECT]
4. Handset (chirps)
press [END]
5. display reads "Not Registered, Place in base..." =====================================
For some GE models:
1. press "program[mute]"
2. scroll to "Handset Setup" press "program[mute]"
3. scroll to "Deregistration" press "program[mute]"
4. scroll to "Yes" press "program[mute]"
5. display reads "Not Registered"

Once you have the handset displaying "Not Registered"
you can follow the User's Manual instructions to register
the handset.

The model number for your cordless phone is shown on
a small sticker underneath the battery in the handset --
enter this number at to get a free
copy of the User's Manual if you need it.

Good luck!

Mar 14, 2016 | Phones

1 Answer

I use GE digital 5.8 GHZ message on My phone need to register. How to register?

Place the handset in the base cradle for 20 seconds.

If you need a manual, you can download one at

Apr 04, 2011 | GE 25952 Cordless Phone

2 Answers

Need help registering the GE additional cordless model 27911.

I had the same problem but I fixed it by:

1. Disconnect the battery on the handset.
2. Wait 1 minute and reconnect.
3. Register handset.

Jan 10, 2009 | Uniden Cordless Phone

1 Answer

Sync a new handset to kx-tg5632 phone

This works on MY panasonic; May work on yours too!

Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
3 Handset:
Press {OK}, then wait until a beep
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.

Dec 29, 2008 | Panasonic KX-TG5632 Phone

2 Answers

Register my hand set

What a ******* waste of space this site is.

Apr 25, 2008 | Phones

1 Answer

Register problem

Each handset has to sit in the base cradle for at least 15 seconds to register. It should say ready within a few seconds. Same thing after the power shuts off. All handsets have to be re-registered in the main base set.

Dec 27, 2007 | GE 25932 Twin Cordless Phone

1 Answer

The optional handset not working

Yeah, put it on the main charger and let it register. It takes about 15 seconds.

Dec 08, 2007 | GE 25952 Cordless Phone

3 Answers


i faced a similar problem.try doing this
1) go to handset menu & somewhere u wil find registration
2)it wil ask for pin , try 5555 or 0000
3)it wil display waiting for reg or searching......
4) press the base station button for some 5 seconds until it beeps continuosly & stops....
5) as beep stops press 1 or 2 or 3 or 4 in handset ( no. of hanset handled by base)...try all possibilities ( sometimes takes automatically if u dont press any number)
6) thats it.......

Oct 13, 2007 | Uniden Cordless Phone

2 Answers

Cordless GE phone issue. 25825GE3-A

1. press the "talk" button FIRST
2. then press "program" button and follow instructions on screen

only one phone said "needs registration" but had to register all 4 phones but this worked for me
hope this helps

Sep 11, 2007 | Uniden Cordless Phone

4 Answers

Handset wont register

To register the handset:

1. make sure phone is charged
2. hold down the "mute/program button on the phone 10 seconds.
3. you should see a message on the screen that says you need to push the "pager button" on the handset.
4. Push the pager button

Apr 10, 2007 | Uniden Cordless Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

892 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts


Level 3 Expert

93922 Answers

Dave Ellis

Level 2 Expert

84 Answers


Level 3 Expert

7983 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides