Question about Panasonic ET-RM100 Remote Control

1 Answer

Need a clone box for multiple Panasonic ct 2522 he televisions

I work for a small 60 unit family owned motel. Recently the motel owner purchased new (new to us) furnature from a large motel chain. Included in the purchase were the Panasonic CT-2522 HE Televisions. The problem is the televisions are in "hotel motel" mode and the included remote will not change this. I have downloaded the manuel, and have tried the instructions "action volume up" "action channel up" but cannot get that to work. What I think I need is a clone box. Where can I find that at a resonable price. Thanks in advance for any and all help!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 325 Answers

You can get your Panasonic Tv out of hotel mode with the Regular remote control you got with them.

Please follow the steps below.

Press and hold the V/- button on the tv itself.
while you are holding this button down, with the Panasonic remote you got with them press the AV button 3 times.

This will bring up a hidden Installer Menu this is where you can take off the HOTEL MODE. and set up your owe setting.

While you are in this mode, be very care you are not switching things off that you are not sure what they are. as this may put a spanner in the works

Hope you get this all sorted out.

Little Dish Fitter

Please leave a thumbs up if this sorts you out....

Posted on Sep 26, 2009

  • elmaal Oct 10, 2010

    This does not work for Panasonic model CT-2733HCT. It is still in hotel mode.

  • mama_blonde Mar 12, 2011

    what if you did not get the remote with the tv? can you do this with a universal remote?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motel tv broken trying to hook up my own


1st I hope the motel is giving you a discount for a room with no tv , second an educated guess would be that your tv is non digital and is set to receive an antenna signal , along about three years ago most all cable systems went to a digital system , this required a down converter for the older TV's to still be able to work on higher channels but some systems still sent 2-13 out on the wire for the older sets as well , essentially the converter takes a hi res digital signal and changes it to a fuzzy/blurry analog signal for the old tv's , silly as it sounds , there's millions of em working everyday in America that way

Feb 26, 2016 | Panasonic Televison & Video

1 Answer

How to cuting a hole in a chain link frence pdf


I've never heard of cutting a hole in a chain link fence before. I'm considering installing one of these around my own yard to help keep my dog on my property. My family recently bought him and he still isn't that well trained. I think something like this would help immensely. Chain Mesh Fencing Melbourne Chainmesh Security Fencing

Jul 03, 2014 | Home Fencing

1 Answer

I have a 2009 pop-up camper with a Dometric 2193. The previous owner stated they never used the unit. They only had the camper for 5 months. I cannot get the unit to cool with gas or electricity. I The...


One of the first things I advise a new owner of any RV is to have the propane system checked by a certified RV technician. I have seen brand new units from factory with propane lines left unattached to appliances, as well as past owners of used units who have decided to try a few things of their own that were extremely dangerous. This unit apparently has sat for approx. 2 yrs, and spiders etc can build nests, bees can build nests that will block ventilation etc, which all can create a situation for a fire or worse. PLEASE, spend the $60, let them clean and inspect the system to give you piece of mind and know that it is safe for your family and friends as well as you. My guess is that it is not a serious problem, and good chance still covered on 3 yr. warranty.

Mar 10, 2011 | Dometic RM2193 Compact Refrigerator With...

1 Answer

We have amana heat / air units in our motel. I am not at the motel at thia time, but the manager has called me saying the unit was not getting warm and the digital lights say SP. can you tell me what SP...


Well, the solution is sort of a good news/bad news situation. It appears that the model number that you listed has been subject to a Safety Recall. This despite the fact, Amana no longer makes that specific model.

For further information and to make sure your specific model is included in that recall, go to
http://ptaccord.regcen2.com/

Feb 03, 2011 | Amana PTH153B50AM Air Conditioner

1 Answer

I recently purchased the 60 piece drilling and driving set that included a hole saw and mandrel but i cant figure out how to secure the hole saw to the mandrel, there are no alignment pins


Check the base of the hole saw--it should have a 'D' shaped hole which matches the shaft of the mandrel. You unscrew the large nut from the mandrel, slide on the required hole saw, then reinstall the nut on the mandrel with the machined-out area toward the saw. The saw must not wobble on the mandrel! Make sure your drill motor is turning in the correct direction. Use a cutting wax on the saw teeth when cutting metal. Hope this helps!

Jan 04, 2011 | Ryobi Garden

1 Answer

How do you adjust the water level for small, medium and large loads of laundry on Kenmore washer model # 29822800? I never had a washer where I couldn't choose how much water entered the tub. We...


you will need to order the manual from sears directly,as for the load size there is no manual setting on this unit as the e.c.u. takes care of this automatically

Oct 14, 2010 | Washing Machines

1 Answer

I have a 1600w electric black & decker chainsaw recently purchased that simply takes forever to cut the smallest of logs. Is this the norm?


Hi there Bugs,

Definitely not the norm. I'm guessing that although it was recently purchased, it was used?

It will either need a new chain or have the old one professionally sharpened. You didn't mention bar size, but a new chain should be between $18-30.00.

A less expensive alternative would be a small engine repair shop that services chainsaws. Most also have reconditioned chains for sale.

Eight days ago I picked up a 19" bar banana bar and used chain for $15.00 total to finish some oak. It Rocks.

Try the chain change. Difference? Night and Day.

Best regards
Mike


Jul 30, 2010 | Black & Decker Garden

1 Answer

Missing remotes for hampton bay ceiling fans


https://www.google.com/search?q=remotes+for+hampton+bay+ceiling+fans&rlz=1C1PQHB_enUS689US689&espv=2&biw=1536&bih=748&source=univ&tbm=shop&tbo=u&sa=X&ved=0ahUKEwik3qiMx4bTAhXh5oMKHV3vDJ4QsxgIGg

Apr 02, 2017 | Hampton Bay 52 In. White Redington...

1 Answer

Where is the fuse on a Panasonic CT-32HC43. It just won;t turn on. It was working great and then nothing.


The fuse is located on the power supply board. It looks like a small glass tube with metal caps at both ends like the ones in the image below on the board next to it you will see a small marking that says the specifications of the fuse. Ex: 10A(Read 10 Amperes), 120V. The replacement you are gonna purchase should be of the same specifications. Make sure you unplug the tv from the power supply before replacing it so that you will avoid the risk of electric shock.
A positive rating for the advice provided will be highly appreciated and I will be glad to assist you further if you need more help.
3b927bb.jpg

Sai.

Mar 29, 2010 | Panasonic CT-36HL43 36" TV

Not finding what you are looking for?

Open Questions:

Panasonic ET-RM100 Remote Control Logo

1,117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5484 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75564 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...