Question about Fender Passport P-51 Consumer Microphone

1 Answer

I need an adaptor to work with my PC...

I have the Fender Passport P-51, but I need an adaptor to plug it in to my PC to record directly to my computer software. Is there an adaptor out there that will serve this purpose? If so, where can I find it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 136 Answers
Re: I need an adaptor to work with my PC...

You can buy adapters at any Radio Shack or other electronics store. There are all types of adapters.

Posted on Sep 19, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Can I place my Fender Passport P-150 SPEAKERS ONLY on another system as ''extra speakers'' to a larger system. The larger system is a Samson XM910 900 Watt.

The speakers are 8 ohm (three 2 ohm in series in each cabinet).

You can connect them in parallel with others HOWEVER you cannot go below 4 ohms a side with your amp. This means you could use ONE other 8 ohm speaker in parallel with one of the passport speakers PER side.

Since the amp can vastly exceed the passport speaker rating you need to be careful to not overpower the passport speakers. One way to HELP regulate the level to the passport speakers is to use a LONG small gauge speaker cable on the passport speakers. Use a 50 foot 16 gauge speaker cable while using heavier, shorter cables on your mains.

With your Samson I would use mains rated at 300 Watts CONTINUOUS power, or at least maintain discipline in volume level to [revent speaker damage.

ALWAYS loop your speaker cables through handles of the enclosure to prevent them being pulled out during use which will destroy your amp... VERIFY the plugs are seated before pwering the system.

Jul 08, 2010 | Lectrosonics FENDER PD-250 PASSPORT SYSTEM...

1 Answer

When I record into a recording program only one half, I believe the right side records. Why is that?

You need a adaptor jack. The mike probley has a mono (2 conductor) plug and the recorder probley has a stereo (3 conductor) jack.
If you take the mike to radio shack and explain the issue they'll sell you a $5 adaptor.

Apr 17, 2010 | Philips PH62080 Uni-Directional Microphone...

1 Answer

When the the Fender Passport 250 is plugged into the computer through the stereo out, there is feedback/buzz in addition to the sounds the microphones pick up, even when the mikes are off.

If there is a 120hz buzz then there is a ground loop between the computer and the passport. You need to get a ground isolator to go between the two. If the buzz is deeper the may be a audio ground off or the hum is comming from the power supply

Dec 27, 2009 | Lectrosonics FENDER PD-250 PASSPORT SYSTEM...

1 Answer

Fender Passport 250:

The manual is here if you don't have one: Have a look at page 9 and read the VIP Channel 1 only section. It will explain the solution to your problem and the settings to overcome it. Please let me know if this helps.

Nov 29, 2009 | Lectrosonics FENDER PD-250 PASSPORT SYSTEM...

1 Answer

How do i get a manual for the fender passport p-150?

Try here:

Oct 12, 2009 | Fender Passport P-10 Professional...

2 Answers

Pluged into the wrong voltage


You have to replace the power supply with exact voltage and amperage.
Be careful next time.


Jul 27, 2009 | Fender Passport P-51 Consumer Microphone

1 Answer

Passport 250 PD dropped face first and it loosened the inside speaker connection

I have experience with the original Passport 250 as leader of the design team. To get inside of the speaker cabinet, you will need to remove a couple of small screws that hold in the grille at the top and bottom of the cabinet face. Once these screws are removed, you will need to carefully pry out the grille from its pressure fit in the plastic noting how it is placed so you can reassemble the grill later. Once the grille is removed you will notice several holes located around the outer perimeter of the speaker panel. Inside these holes, you will find the screws that secure the front of the cabinet (part with speaker attached) with the back of the cabinet housing. Once you have all of the screws removed, you can separate the front panel from the housing and fix the wires or dislocated parts such as crossovers, etc.

Once repaired, use the reverse method to reassemble the cabinet. Don't tighten the cabinet screws excessively as they can strip the plastic.

I hope this repair works for you.

Oct 18, 2008 | Fender Passport P-51 Consumer Microphone

1 Answer

Fender Passport P-250

If you're still in need of a manual for your Fender Passport P-250 it can be found at:

Good luck!

Sep 27, 2008 | Fender Passport P-51 Consumer Microphone

1 Answer

Fender Passport P-250

Sorry about the delayed response, I just noticed this posting.

The protect indicates a problem with the output section of the amplifier. Effectively the amp has been shutdown to prevent further damage. Although the unit should not have been working (at least not well) at 30V, unless they htried to run it at full volume, there should not have been damage. The outputs are blown and this unit requires repair. If I remember these units correctly, there are 8 output transistors, most of which may require changing. WIthout seeing the unit and taking some measurements, I can not say for sure, but expect $40-$70 in parts.


Sep 03, 2008 | Fender Passport P-51 Consumer Microphone

2 Answers

Fender Percission bass

Sounds to me like you have a fret problem in that area. sometimes frets will pull up from the fretboard due to heat or from shipping. Take it to a local music store that has a good repair man. It's a simple fix and cheap to repair.

Apr 14, 2008 | Fender Passport P-51 Consumer Microphone

Not finding what you are looking for?
Fender Passport P-51 Consumer Microphone Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fender Microphones Experts


Level 2 Expert

611 Answers

Ben Armstrong

Level 2 Expert

332 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Fender Microphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides