Question about Lands Phones

Open Question

We have a Polycom 2201-00106-001 H9 and we are following the instructions that Inter-tel/Mitel gave us for initiating a conference call from the Polycom, but they do not work. We can get the first caller on the line, can press flash and 8 followed by the 2nd caller's number but cannot link both calls togeter so all 3 of us are together. Caller 2 always seems to get disconnected but after pressing flash a few more times, the first caller returns. Any thoughts?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

JCinNC
  • 11 Answers

SOURCE: for incoming calls, the caller cannot hear me for 2-10 seconds after I pick up

You've got an IP issue somewhere in your setup. It sounds like the call is being lost and then the phone is querying the DNS server to find out where it should be looking for the call. Do you have a VOIP server name or it's IP address in the setup? Are you using DHCP or manually assigning IP addresses? If the VOIP server is not on a static IP, I would fix that first. Post back here the answers and we can look at it further.

Posted on Aug 04, 2006

marinos
  • 114 Answers

SOURCE: caller id

This means the person who is calling you is hiding his number from caller IDs. There is no problem with your caller ID.
if you try and call your phone from a mobile phone and you type #31# and then your phone's number you will see that the number of your mobile will not be displayed. (#31# service must be provided by your mobile company)

Please rate this solution as "Solved" if you are satisfied, otherwise please ask again here.

Thank you :)

Posted on Oct 12, 2007

  • 1 Answer

SOURCE: Dropped Conferences

You need to upgrade the code on your system. This happened to me and upgrading the code fixed it. Good luck!

Posted on Mar 07, 2008

SOURCE: Caller ID Problem on the GE2811 Twin cordless phone system

Still have not been able to solve the problem of having inconsistent caller id display when the telephone rings

Posted on Mar 24, 2008

  • 149 Answers

SOURCE: Caller ID Scroll

Your system needs to have a mif-m card and kmm chip installed and all programming setup in order to scroll through the caller id. If this is all setup you can hit the directory button and than use the arrow buttons under the display to scroll. ldtsnj.com

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Inter tel 5000 system alarm 101


Alarms 100 and 101 indicate that one station is running errors You can run an error report to find the faulty station

Apr 15, 2014 | Mitel Inter-tel/5000 580.2000 Pm1...

1 Answer

How to reset the password of polycom hdx 7000


You can use the hardware restore button on the Polycom HDX system to reset
the system in one of these ways:
• Restoring configuration-Restores the configuration, which resets most
system settings to default values.

• Factory restore-Completely erases the system and restores it to the
software version and default configuration stored in its factory partition.
If you follow this procedure while a USB storage device is connected, the
system restores from the USB device instead of the system's factory
partition.
The restore button is on the front of the Polycom HDX 9000 series system, as
shown in the following figure.

1.png



The restore button is on the front of the Polycom HDX 8000 series, Polycom
HDX 7000 series, and Polycom HDX 4000 systems, as shown in the following
figure.

2.png


The restore button is on the left side of the Polycom HDX 4500 system, behind
a wire mesh screen, as shown in the following figure.


3.png


Use a paperclip to press the restore button through the wire mesh covering
that side of the system. to reset the HDX Series system we can press the restore button over 15 second.

Feb 27, 2014 | Polycom VSX 7000 Video Conference

1 Answer

Password forgot default


Any password forgotten warrants re-install of the firmware.Charge the battery fully Connect to the pc. Run Nokia OC Suite. Backup data and reinstall the firmware. Follow instructions word to word.

Oct 30, 2013 | Polycom QDX 6000 (720030831001) Video...

1 Answer

The instruction manual has been misplaced and I am trying to set up a conference with dial in people


here is the companies direct link to the user manual:
if you have the SoundStation 2 with a display here is the link:

http://support.polycom.com/global/documents/support/user/products/voice/soundstation2_with_display_user_guide.pdf

Without display

http://support.polycom.com/global/documents/support/user/products/voice/soundstation2_without_display_user_guide.pdf

Aug 16, 2011 | Polycom SoundStation2 Audio Conference

1 Answer

When conferencing two outside parties, how can I (from the Inter-Tel Phone at the office) have myself removed permanently? When I drop off the line and leave the two people on, it rings me back to where I...


The Inter-Tel will not allow you to leave the conference without disconnecting the outside parties, this is the system design. The hold recall time could possibly be increased to reduce the aggravation.

Dec 07, 2010 | Inter-Tel Axxess Corded Phone

1 Answer

Polycom soundstation 2w has no signal. tel line is good, power to transmitter is good. Soundstation seems ok, can get to menu & settings ok.


Hello Edward,
This is a known issue with this product that requires a software upgrade to resolve. Please download "SoundStation2W Software Upgrade" from the Product Support page of our website and follow the included instructions. If you need any assistance please don't hesitate to call for assistance at 1-888-248-4143 Options 2, 4.

Regards,
James

Sep 14, 2010 | Polycom SoundStation 2W (2200-07800-001)...

5 Answers

Conference call with a Polycom SoundStation EX


The conferencing capability to bridge 2 (or more) external stations comes from the telephone equipment/service that you have purchased. Either you are behind a PABX or Electronic KSU, which provides multiple phone service to your office, or you purchase conferencing capability from your local telephone provider (Verizon, AT&T, etc). In either case, the way to initiate a conference call would be the same as when you would have a desktop/office phone and establish a conference/bridged call to external parties. Usually this occurs by having one party on the line, flashing the disconnect button momentarily, getting a new dial tone, dialing and connecting to a second party, then flashing the disconnect button again, which signals the equipment to bridge those two calls to your station.  On the SoundStation EX there is a Flash button that provides that capability of momentarily flashing the disconnect button.  Try and see if that works. If not, then you will need to make arrangements to purchase the external equipment or service from your provider.  If you have the PABX or electronic KSU, it may also be a configuration option that you will need to have your support person for your telephone system, activate for that station connected to the SoundStation EX. Hope that helps. 

Oct 22, 2007 | Polycom >>> SOUNDSTATION PREMIER EX /AVAYA...

2 Answers

LCD Display keeps flashing "INITIALIZING"


It needs to be plugged into a properly configured Avaya Definity digital port / wall jack. (NOT a regular telephone line as this can damage the polycom!!!) Does another Avaya digital phone work in that jack? If it does then call polycom for a RMA and eturn the phone under warrenty. If another Avaya digital phone does also does not work you need to check the PBX configuration or there is a wiring error at the jack or the PBX.

Jul 10, 2007 | Polycom SOUNDSTATION2 AVAYA 2490...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...