Question about Epson TM-U220 Matrix Printer
TM 220a and TM 220b should come with auto cutters
You have to unscrew the metal tab under the printer, you will find two sets of DIP switches. upper one is DWS 1 and the lower one is DWS 2. On DWS 2 you need to have jumper #2 ON. this enables or activates the auto cutter on printers. Good luck...
Posted on Jul 04, 2009
Pls check ur ptr. cutter wight cable
Posted on Dec 29, 2012
Elie, I just had the same problem with tm-u220a. When I got to the cutter motor, I've noticed that there is a small switch that goes under the cog. Two wires leading to that switch and two that lead to motor end up as a connector on the circuit board (accessible from under). I've checked if the wires to the switch are whole and sure enough one of them was broken. Because of the complexity of the printer, I just took two new wires from an UTP cable and connected the switch and connector. Worked like a charm! I hope this helps you.
p.s. Sorry if my English is a bit jolty. :(
Posted on Apr 26, 2010
I have aTM 220a and TM 220b where i have a problem with the auto cutter, it does not return to the normal position after cutting, and i always returns to its original position manualy. does any one have an idea of the problem
Posted on Oct 24, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 27, 2011 | Epson TM-U220 Matrix Printer
Jun 08, 2009 | Epson TM-U220 Matrix Printer
Jan 24, 2009 | Epson TM-U220 Matrix Printer
Oct 03, 2008 | Epson TM-U220 Matrix Printer
May 09, 2008 | Epson TM-U220 Matrix Printer
1,697 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: