Blinking lights router - SonicWALL TZ100 UTM Appliance

Which light is Red blinking, you should unplug the router, and wait about 2 min, then plug back, if you still see the blinking red light, it may be a bad Router if it is the power light,.

It depends. Have you checked the Netgear support site for FAQ and the manual. In some routers, orange lights indicate wired 100Mbps connections while green indicates 1000Mbps. In other cases, blinking lights indicated that the router is 'bricked'.

Does the power light blinks when you press the reset button?
If power light is blinking continuously then I think your router is not working and you need a new one.
Read how to reset Linksys router

The power light should stay solid as long as the router is plugged in. The WAN light and LAN lights are solid when you are connected, and the connection is idle. The lights blink when traffic is present. The lights are off when there is no connection.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

you should call the wireless manager.
good luck.

Welcome to FixYa
Indication of Router Lights:

• Power light blinks. If LAN or WAN cable is plugged in, their respective lights will flash on activity.
• Power light turns off for several seconds.
• All lights, except power light, turn on and then off.
• Power light blinks slowly, then faster, and WLAN light will turn on.
• Once Power light and WLAN light are on solid, the router is fully rebooted.

A working router should show solid green power light. upgrade the firmware of the router.
If this Helped you-Rate me..Thanks for Using FixYa

Modem light blinking-----> No internet connection available....... that is, the router is not yet configured for your internet service provider.... connected light OFF------>No internet connection
wired light blinking------> data transmission happening.....

If the power light is blinking on the router , then it might not be working properly.
You will need to press the reset button on the back side of the router for 30 seconds. release it. unplug the power cable. plug it back in. wait for a minute and check if the power light is solid.
If not then try to reset the router again.
do the same thing and check if the power light is solid.

If the power light is solid then you will need to set up the router again.
If the power light is still blinking, then connect the computer to the router and check the IP address on the computer. If the IP address is 192.168.1.100 then try to open the set up page of the router and check the settings of the router.

Click Here for step by step instructions

Hi jackmyrtue,

Here's what the lights on the front indicate:


A. Wireless Security

• OFF Wireless security is off
• Solid Blue Wireless security is on

B. Wireless-Computer Status

• OFF Wireless computer is not present
• Solid Blue Wireless computer is connected to the Router
• Blinking Amber Problem with wireless computer onnecting properly to the Router

C. Wired-Computer Status

• OFF Wired computer is not present
• Solid Blue Wired computer is connected to the Router
• Blinking Amber Problem with wired computer connecting properly to the Router

D. Router/Power Status

• When you apply power to the Router or restart it, a short period of time elapses while the Router boots up. During this time, the "router" icon blinks.
• When the Router has completely booted up, the "router" icon becomes a solid light, indicating the Router is ready for use.
• OFF Router is off
• Blinking Blue Router is booting up
• Solid Blue Router is on and ready

E. Modem Status

• This icon lights in blue to indicate that your modem is connected properly to the Router.
• It turns amber when problem is detected.
• OFF Router is NOT connected to modem
• Solid Blue Router is connected to modem and functioning properly
• Blinking Amber Problem with modem

F. Internet Status
This unique icon shows you when the Router is connected to the

• Internet. When the light is off, the Router is NOT connected to the Internet.
• When the light is blinking amber, the Router is attempting to connect to the Internet.
• When the light is solid blue, the Router is connected to the Internet.

When using the "Disconnect after x minutes" feature, this icon becomes extremely useful in monitoring
the status of your Router’s connection.

• OFF Router is NOT connected to the Internet
• Blinking Amber Router is attempting to connect to the Internet
• Solid Blue Router is connected to the Internet

I hope this helps figure out your PS3 issue.

Thanks and don't forget to leave a rating.

Mark

If the powerlight flashes the entire time.. even after a hardreset, your router is probably only good for a brick....