Setting the clock

the car has at least 3 "entertainment" packages, which go with the interior level of the car. look in your manual and figure out which package radio and clock your car came with, then repost your question telling us which package your car has and then we will know which set of instructions you need to set your clock. But wait, while you are figuring out which system you have, the instructions to set the clock will be right there and you can do it yourself. Eureka moment.

replacement manuals can be had on ebay for a couple bucks

The settings on this clock were difficult to figure out even with the manual. I made a lot of notes in the manual to help myself each time I had to reset the clock and CD Alarm. See Attached .pdf.

You do not have to set the clock time
as a built-in automatic time set system
is equipped in this clock powered by 3V
(2 x “AA” batteries (included)). All you
have to do is to plug this clock for
power and current time will be shown
automatically.
Before plugging in for power, follow
the steps below to select time zone.
Setting Time Zone
You may slide the time zone selector at
the bottom of the clock to Pacific,
Mountain, Central or Eastern.
Refer to Figure 1 for U.S. Time Zone
details.
Refer to Figure 2 for Canadian Time
Zone details.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

This clock will set it's self in a 24 hour time frame. You need only set the time zone your in.

If it does not correct it;s self change walls and location in your house.

The transmitter is located in Fort Collins, Colorado. this station transmits the time codes and is best received at night.

Hope this tip helps.

R/
David

I had the same problem with a another sound chamber unit but figured it out. there should be a radio buttton somewhere to turn on the radio, make sure AM/FM is set, the volumn is up and the tuner is on a station, make sure there is an antenna wire if there was a place for one.

next, try to figure out setting the time, and then the alarms one at a time. the calender thing, that's a bit harder! they are great clocks, but tough to program.

1> Press and hold the select button. The setup display appears. 2> Press the select button repeatedly until "CLOCK-ADJ" appears. 3> Press (DSPL). The hour indication flashes. 4> Rotate the volume control dial to set the hour and minute. To move the digital indication, pres (DSPL). 5> Press the select button. The setup is complete and the clock starts. To display the clock, press (DSPL). Press (DSPL) again to return to previous display. The clock uses a 12-hour digital indication.

On a pioneer, turn the deck off(hold down source), then hold down the function key the clock will come up and you can use the arrows to change the values.

Go to timexaudio.com, select SUPPORT, then select PRODUCT MANUALS.

hi just wondering if you figured it out considering this was in 2009.. i cant figure it out either

I also had some problems to figure out how to set the time, but here is the sollution i came up with:

 

1. Press "Clock/Timer" until a clock and "on" starts to flash in the display.

2. Turn the "volume/caleido jog" to choose which function you want to set (alarm on/alarm off/time).

3. Press "clock/timer" again.

4. Change time with the volume wheel.

5. Press "clock/timer" when you are finished.