Question about Hitachi C10FR 10" Job-Site Table Saw 15 AMP

1 Answer

On my hitachi table saw mod. c10fr sounds like the bearing is bad

Sounds like the bearing gone on motor

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,176 Answers

Went to their site and they don't offer just the bearings for the motor but sell as an assembly. If this tool is fairly new I would return if not what you can do is remove the motor and pull the armature with the bearings out and then go to a repair center and match them up. These bearings are numbered with a universal code so it should not be that hard. Let me know if you still need help and if I have answered your question would you please rate my response accordingly.

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Circuit breaker trips out


What is the rating of the breaker? Is this enough to run the saw? If this is ok, has the motor become damaged or has the blade got dirt or wood dust slowing it down?

Jul 25, 2014 | Hitachi C10FR 10" Job-Site Table Saw 15...

1 Answer

The motor on my saw will not turn. there is a piece of plastic between the main gear and motor. Should I try to have it repaired or replace motor or buy a new saw.


Hi,
Checkout ereplacementparts.com and see if they have the parts for your saw...they even have exploded views of the saws that they have parts for... it may not be hard for you to do the job yourself!!

heatman101

Jun 30, 2011 | Hitachi C10FR 10" Job-Site Table Saw 15...

1 Answer

I own a Hitachi 10CFR Table Saw. My question is: Can I load a Dado Stack onto the Arbor of this table saw to create a 3/4 dado cut? I've read everything from "Yes" to "Absolutely Not"...


After doing some research, I found that hitachi only recommends up to a 1/2 dado for this machine with most of the users agreeing that it probably does not have the stability or power to run a 3/4 inch safely. Meaning you probably can run the 3/4 but at you own risk.

Mar 03, 2011 | Hitachi C10FR 10" Job-Site Table Saw 15...

2 Answers

My husband lost the safety key for our Hitachi Table Saw Model Number C10FR. This saw is discontinued and the customer service department at Hitachi will not return phone calls or E mails. Can anyone...


I found Hitachi customer service to be quite helpful in replacing my safety switch for my C10RA2 table saw. My C10RA2 has a fixed metal stand, not the folding stand, and the part number for the red safety switch or key is 531-992R, while the switch itself is part number 314-459. If you have the folding stand the part number for the switch is 321-620 and the safety key is 321-621. Hitachi customer service in US: 1-800-706-7337. I am going to buy two or three! Almost lost a table saw over a cheap plastic part.

Dec 27, 2010 | Hitachi C10FR 10" Job-Site Table Saw 15...

1 Answer

Can you run a dado blade on this saw?


The 15 amp 3 hp motor has plenty of power to handlee dado sets and you can purchase a dado blade insert for the saw on line from multiple resources

Jun 29, 2010 | Hitachi C10FR 10" Job-Site Table Saw 15...

1 Answer

My hitachi c10fr table keeps blowing the built in breaker everytime i turn it on---any suggestions


Check the motor housing and make sure it is not clogged with sawdust, that could bind the armature and cause it to over heat

Jun 09, 2010 | Hitachi C10FR 10" Job-Site Table Saw 15...

1 Answer

My husband lost the set up instructions to his Hitachi table saw.


You can download the owners manual for all Hitachi products by going to http://www.hitachipowertools.com and selecting your product. Below is the link for the online pdf format owners manual for the saw in question.

http://www.hitachipowertools.com/product/files/saws/table_saws/C10FR_OM.pdf

Feb 07, 2010 | Hitachi C10FR 10" Job-Site Table Saw 15...

1 Answer

I need the manual in Spanish to make the machine up .Where can I find one .This is Jobsite table saw C10FR THANKS


I just using an English / Spanish dictionary to translate it myself
Thank you for your reply
Silvia

Aug 21, 2009 | Hitachi C10FR 10" Job-Site Table Saw 15...

1 Answer

Hitachi c10fr table saw wiring diagram


Here is a hand drawn diagram

9a7a522.jpg
Please rate this a fixya

Feb 13, 2009 | Hitachi 10", Table Saw with Stand,...

Not finding what you are looking for?
Hitachi C10FR 10" Job-Site Table Saw 15 AMP Logo

Related Topics:

426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Saws Experts

John Trevino

Level 3 Expert

1383 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

JOHN LAPIER

Level 3 Expert

2428 Answers

Are you a Hitachi Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...