Question about Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Motor control board needs replaced price?

Motor control board needs replaced price?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 335 Answers

FAV6800AW/FAV9800AW correct?
What error do you take to the console? LR maybe?
Part Number is 25001079 on Ebay
Appliance Zone punch P/N in price checker.
Sears Parts Direct so you can double check P/N.
Good Luck Rich

Posted on Jun 29, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer displays LR Locked Rotor when washer is on rinse cycle. Motor NOT spinning. What and where and app how much is the part?


Hello, The "rotor" is the actual shaft of the motor and depending on your exact series number (which can be found on the label inside the door) the motor and motor control board must be replaced together if it is series 88 or below (series 1 to series 88) the appx. cost for the motor kit including motor and control board is $300 just for the parts
if it is series 89 or higher then just the motor can be replaced w/o the board and the price is about $190 for parts then in either case i would estimate the labor cost of a repair company to be $175-225

Jul 28, 2011 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag Neptune MLE2000AYW won't spin, motor wont ever move during motor control test in service document, I never get any output on the motor output leads to drive the motor. Switching power supply just...


Three places I check for appliance parts, besides the local appliance repair store, are:

RepairClinic: http://www.repairclinic.com/Circuit-Board-Or-Timer-Parts?s=t-MLE2000AYW-%3d%3dc13

AppliancePartsPro: http://www.appliancepartspros.com/partsearch/model.aspx?model_id=47166

ApplianceZone: http://www.appliancezone.com/SearchProducts.aspx?id=MLE2000AYW&ctl00%24MainContent%24btnSearch=GO%21

It sounds like you have gone through the tests in the Service Book, and usually when the motor won't spin it is the control board, the motor, or the wiring harness. If you are getting no power from the leads on the control board to the motor, I would replace the control board. If you had or have any codes that come up on the machine, what are they? I have had to replace many motor control boards, and everytime it gets the machine going again. Only a few times did I actually have to replace the motor. It sounds like your motor is fine though. The most common cause of failure in these motor control boards is electrical surge. Many control boards now have built in surge protection to help prevent failures.

Feb 22, 2011 | Maytag Neptune MLE2000A Front Load Stacked...

1 Answer

Does my maytag neptune fav 6800 hav A reset button. All lights are on after A thunder storm last night. I dont have A manual thanks


There is no reset button you can unplug the 120VAC power cord for 30 seconds or so then repower up.

Surge protection on the 120VAC outlet servicing the washer is a good idea going forward.

If normal operation does not return with the power up/power down then I feel you may have failed Control Board.

FAV6800A/FAV9800A Service Manual and Sears Parts Direct for reference.

See Sears Parts Direct or any vendor for pricing this is the Control board you need if yours has failed p/n 25001217.
I just checked Sears Parts Direct and they have it for $135.67 but is states back ordered. That is the best price out there. I wonder if they made a mistake in pricing.
With a Thunder Storm line transient there could be other issues Motor Controller or TDS sensor but I feel it will come down to the Control Board.
If you decide to go forward and replace I will give you some additional info on removing the Console and the proper way to remove the ribbon cable from the Console to the Control Board……Rich

Jul 15, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

The belt on treadmill will rull at full speed, can't shut it down without turning it off.


Sounds like your motor control board has shorted you need to go to iconfitness.com got customer support then to parts replacement input brand name and model# you will get a exploded view of parts and price.
If you proceed in purchasing the part then you will need to remove motor shroud replace circuit board. You may need to do a speed calibration and it will come with instructions how to do that.

Mar 07, 2010 | Epic View 550 Treadmill

1 Answer

Dryer does not stay running once you let off the start button


You likely need the electronic control board, which supplies the power to motor once you release the start button. the price of the board is around $100. Need the complete model# for the correct part number and price.

Oct 20, 2009 | Kenmore 62602 Electric Dryer

1 Answer

Motor control board needs replacing


You need to get the model number off the door jam or from the back control panel to order the correct board.
Looks like the right one to me you have listed already , once you get the part number for the actual motor board then you can search on line for the best price on one.
Phil

Apr 15, 2009 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

The tub that holds the clothes does not spin. The water goes in and it takethe soap and softner but will not spin. The timer works and it seems to go through the cycles and fillls and emptys but the tub...


I've only seen one of these belts break in my 7 years of fixing Neptune's. I have replaced dozens of motor/ motor control board kits. Maytag upgraded the washer motors about 5 years ago, if yours is older it's probably got the older style motor. If that's the case you need to verify that the motor control board is getting power from the main control board, if it is, then you need to replace both the motor and motor control board (it comes as a kit). If it isn't you need to put 120 volts to the motor control board and see if the motor spins at 50 rpm (normal agitate speed), if it does, you just need the main control board, if it still doesn't run you need the main board and the motor/ motor control kit. If it has the newer motor, you would also need to test and replace the motor and/ or the motor control board separetly.

Jul 15, 2008 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Washer wont spin


You may be right, but before you rule completely on the motor, have you checked the Spin Control (sometimes referred to as a Motor Control Unit)? My experience with this unit usually has the Spoin Control board going bad more frequently. There should be a tech sheet located inside the washer behind the front panel under the door somewhere. The tech sheet should include all steps necessary in determing how to rule whether the motor windings are good, or the whether Spin Control board has failed. If you decide to replace the parts yourself, you can find them at repairclinic.com and searspartsdirect.com. Repairclinic has better pricing, but Sears has better diagrams used in parts identification and troubleshooting. The parts you may need are as follows:

Repairclinic:
Item 1206430 Spin Control
Item 823073 Motor-sole

Searspartsdirect
Item 4 (p/n #134149220) Speed Control (Under "PANELS/HOSES" heading)
Item 19 (p/n # 131770600) Motor-sole (Under DRUM/MOTOR" heading)

Of course...you can do your own comparitive pricing if you don't wish to shop online. Just use the Sears part numbers as a reference.

I hope this helps. Post back and let me know if you need further assistance.

May 02, 2008 | Kenmore 43142 Front Load Washer

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...