Question about Epson Office Equipment & Supplies

1 Answer

It won't print anymore.

My printer was working perfectly until just now. I haven't tampered with it, yet the paper runs through and it appears to be printing but the paper comes out blank.

Posted by on

  • jeepsdoesjoh Jun 29, 2009

    Thanks I'll try that. The black ink was only put in last week and the others have plenty in. I'll try this now. Thanks

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Epson Expert
  • 387 Answers

Do a few Cleaning cycles. Make sure you have new cartridges installed.

Posted on Jun 29, 2009

  •  Robert Allocca
    Robert Allocca Jun 29, 2009

    If that doesn't work, the nozzles may be clogged or cannot be repaired. It may be time to go to Epson.comand buy a printer. I suggest you Get a CISS for your printer. It will save you TONS of MONEY, never change a cartridge again and it will pay for itself in a month.
    http://www.inkproducts.com/ink-store/

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP C6280 will not print self test diagnostic


Do you have an Anti-Virus program installed on your PC? If so, can you try and disable it before you print.

for more help visit CBR Tech Solutions

Mar 13, 2013 | HP C6280 All-in-One Printer

1 Answer

My Brother HL-2070N printer won't print Web page


In January 2011 Brother update its drivers for your printer due to a compatibility problem. You haven't advised what operating system you're using but you apparently need to update your drivers.

If you are running Windows 7, you will have to update the drivers either from Microsoft Update or Brother. Click on this link for Brother.

If you are running Windows XP, CLICK HERE

Apr 23, 2012 | Brother HL-2070N Laser Printer

1 Answer

My HP Deskjt F4280 will not print Avery injet 08371 business cards. I tryed the other number on the cards, 5371. Neither of them will line up proper. If I print on a blank paper it is printed correct. ...


you realy cannot print with that paper the ink cannot penetrate through, i have an experience here before and tried it on epson it print perfectly

Aug 07, 2011 | Office Equipment & Supplies

1 Answer

Hello Cindy Wells, I saw you on Fixya.com and I am having a bit of a problem with my Canon PIXMA MP490. Basically every time I try to print something the printer will start working (i can hear it...


hi there,

it may be that a paper sensor is picking up a small piece of paper in the printer. Has any paper ever torn in the printer? if so there may be some left behind. Carefully inspect the printer to see if there is any small pieces of paper in the printer. You could also try unplugging all cables and taking the outer cover off to inspect closer.

Re the ink cartridges, inkjet printers are notorious for ink drying out in the cartridges and the nozzles blocking with old ink, if the printer is not used at least once a week. It happened to me, i had to get a new printer.

Hope this helps

Tom

Jul 22, 2011 | Office Equipment & Supplies

2 Answers

My HP deskjet 2050 all-in-one printer only shoots out blank paper and won't print. It used to say there was no paper in it, which there was. It scans & prints just fine - just won't print...


Any error messages on the printer digital screen or the desktop? I take it the "The ink is fine" means that there is ink in the cartridges!

Try a test print via the Control Panel> Printers and Faxes> properties > Print test page.

May 31, 2011 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Hello I have an IBM 6400 printer at work. It prints documents, but every now and then it will print the documents with a white streak running down the paper, like it doesn't print in that spot. I tried...


Hi there, I hope you haven't throw away the printer.. :)
i face similar problem.. its solve by tightening the ribbon latch screw that secure the latch to the ribbon motor.



Feb 02, 2011 | IBM 6400 Matrix Printer

1 Answer

Dell 3100 CN printer...message on printer reads load tray


Cycle Power on the Printer
  1. Turn the printer off.
  2. Wait 10 seconds.
  3. Turn the printer on.
  4. Determine if the issue still occurs.
Verify There is Paper in the Tray

Verify the Paper Size
Look at the chart below to verify that the paper size meets the 3000cn / 3010cn / 3100cn-series specifications.
941802c.gif

Verify the paper size in the tray matches the size set in the 3000cn / 3010cn / 3100cn-series printer´s operator panel.

To verify the paper size in the tray matches the size set in the printer's operator panel, perform the following steps:
  1. Press the MENU button.
  2. Press the down arrow until Tray Settings appears and press the return%20arrow%203100cn.jpg button.
  3. Press the down arrow until Paper Size appears and press the return%20arrow%203100cn.jpg button.
  4. Press the down arrow until the specific paper tray (Tray 1, Tray 2, or MPF) appears and press the return%20arrow%203100cn.jpg button.
  5. Press the down arrow to select the specific paper size, as shown in Figure 1, and press the return%20arrow%203100cn.jpg button.
  6. Press the MENU button.
43d7cbe.gif

*1 Denotes country-specific factory default values.
*2 Available for the optional 250-sheet cassette only.

Figure 1 - Paper Size Chart





Verify the Paper Type Matches the Type Set in the Printer´s Operator Panel

To verify the paper type matches the type set in the printer's operator panel, perform the following steps:
  1. Press the MENU button.

  2. Press the down arrow until Tray Settings appears and press the return%20arrow%203100cn.jpg button.

  3. Press the down arrow until Paper Type appears and press the return%20arrow%203100cn.jpg button.

  4. Press the down arrow until the specific paper tray (Tray 1, Tray 2, or Multipurpose Feeder) appears and press the return%20arrow%203100cn.jpg button.

  5. Press the down arrow to select the specific paper type, as shown in Table 1, and press the return%20arrow%203100cn.jpg button.

  6. Press the MENU button.
91a7233.jpg
Table 1: Paper Type Chart

All media types that are not Plain 1 should be printed from the MPF only.


Verify the printing preferences on the Dell™ 3000cn / 3010cn / 3100cn / 5100cn-series printer.
To verify the printing preferences is set to print from the correct tray with the correct paper size, perform the following steps:
  1. Click the Start button, go to Settings, and click Printers and Faxes.
    The Printers and Faxes window appears.
  2. Right-click Dell Laser Printer 3000cn / 3010cn / 3100cn / 5100cn-series and click Printing Preferences.
    The Printing Preferences window appears.
  3. Verify the Paper Size drop-down is set to the correct paper size loaded in the specific tray to be printed from..
  4. Click the Paper Tray tab.
  5. Click the Paper Source drop-down menu and select the specific tray to be printed from.
    This sets the size and tray defaults.

Verify the Paper Size From the Printing Application Matches the Designated Printer Tray
To verify the paper size from the printing application matches the designated printer tray, perform the following steps:
  1. Open the application being used to print the document. (Example: Microsoft Word)
  2. Click File and click Print.
  3. Verify the paper size.

Verify the Paper Source From the Printing Application Matches the Designated Printer Tray
  1. Open the application being used to print the document.
  2. Click File and click Print.
  3. Verify the paper source.

Do not replace any printer hardware as this is not a printer hardware issue.

Nov 12, 2008 | Dell 3100cn Laser Printer

1 Answer

Epson Stylus C66 inkjet Printer does not print !


Have you tried a cleaning cycle? If not, try one. Now run a nozzle check using the status monitor (right click the little printer icon in the bottom right corner of the screen and select nozzle check). Is there any sign of ink on the paper. Try up to three cleaning cycles. If ink is now flowing, but not yet perfectly, don't carry out any more cleaning cycles. Just leave the printer for 24 hours (to allow any air in the print head to disperse). Then repeat the cleaning cycle/wait process. It may take a while to restore a perfect nozzle check print. If these actions produce no positive results, report back.

Nov 12, 2008 | Epson Stylus C66 Inkjet Printer

4 Answers

Heavy weight paper


Hi it would appear that the paper is too heavy for the machine check the manual as it will have the spec on what paper can be used and also how heavy the paper could be.

Sorry I cannot be anymore help but try using a paper that is about 10-20 gsm lighter.

Thanks J

Jan 11, 2008 | HP DeskJet 1220c InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...