The display screen on my road angel gem has gone very faint

No we do not do parts at all.

A screen that is dim is a problem that for most is not a home repair solution. Basically, a computer component is failing.

How to Repair Faint LCD Display Module

shine a light at an angel on the screen if you see the picture then the back lights have gone if there is lights on the screen but no display, then the t-con board is at fault, if plasma it will be one of 3 boards.

Check that the monitor is still receiving a signal it could have gone into standby mode.
If not you either have a faulty inverter or the back light has gone, to test this when your computer is on is to check you can still see a faint image on the screen that means the backlight has gone, if not its the inverter.

hi,

check if the line appears in BIOS...dont worry when i say BIOS...not sure how to check...turn the system off...restart the system and keep tapping the F2 key...you would get a Blue screen...check if the lines appear on this screen...if it appears...it could either be b'cause the display driver has gone wrong or the system might have a physical damage.....if the lines does not occur on this screen....it is a manufacturing defect...please contact the manufacturer and report the issue for solution.......
regards
Rocky

Take memory card out, hold the power button for 15 sec to put it on, now do the same putting it off. Put back memory card and turn it on, it should work now. Johan. South Africa

Press and hold the Power button for 45 seconds to turn the laptop off.

Then, remove the battery from the battery compartment and clean the metal contacts.
Next, reinsert the Battery and try to turn it ON.

If the display still doesn't come then you may try connecting an external display to check if the Computer is able to produce display and the issue is with the backlight of the LCD screen.


wish u good luck!!!!!!!!!!!

Send the monitor. It's a power supply problem. My 15.4" LCD has the problem, too, whenever I move the monitor down, it powers off, and the menu disappears as well, but I'm going to fix the screen.

- lower resolution on computer ti 800 x 600 - look on screen to see faint image, if so, then inverter or backlight is gone.