I have a Panasonic DP 2310, everything starts and goes to ready. I press start and the display blinks, almost like a power recycle and it says copying but nothing happens, no errors.
there is a short on the board under the start button some where , its quite possible that the solder on the button has come loose and you mite need to solder it again
Was this helpful?
Yes
No
Popular Solutions for Panasonic FP-D605S2 Grayscale
AL-1220.......dark (w/ residue ) toner line on left side of copy. replaced toner cartridge, but...
(More)
AL-1220.......dark (w/ residue ) toner line on left side of copy. replaced toner cartridge, but still showing. having to clean small piles of toner below drum even after replacing toner cartridge. am i having a drum problem.
I have a Dictaphone 2740 Voice Processor. The problems I am having are:
1. Volume is getting...
(More)
I have a Dictaphone 2740 Voice Processor. The problems I am having are:
1. Volume is getting fainter
2. Need new earphones