Question about Dell A960 All-In-One InkJet Printer

1 Answer

I have windowa vista and tried to install it but it keep saying that there a communication problem

Posted by on

  • Dave Bopit May 11, 2010

    First for any reason you are going to buy a new hardware for Vista you want to check what Microsoft calls the HCL (Hardware Computability List.) According to the HCL it is computablehttp://www.microsoft.com/windows/compati... Now download and install drivers from Dell that is linked from the HCL site.http://support.us.dell.com/support/downl... And now see what happens. If it still giving you and error please post it what the error says. If you believe that the error holds no technical value that we could use I would recommend to contact Dell support for further assistance,

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 85 Answers

If the system is detecting your printer, make sure the driver for the printer is windows vista driver for your printer.if not, download the vista driver for your printer from the printer manufacturers web site.

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installed software but when I try to print, message says print failed and when I look at printer in control panel it keeps saying offline how to get it online and stay there? Windows Vista 32 bit


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Disconnect your printer from your computer. Reboot your computer. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Try to print again.
You can also try to re-install the printer driver to repair any possible corrupted files necessary for printer communication and processes.

Jun 16, 2011 | Lexmark X2250 All-In-One InkJet Printer

1 Answer

I'm having trouble installing my 5150 to my laptop. Windowa Vista


sir this laptop is having new drivers in the hp site

please download them and get it installed and enjoy

kamal

proud to be an indian
proud to be a punjabi

Jan 28, 2010 | Lexmark X5150 All-In-One InkJet Printer

1 Answer

Im having same problem when trying to print. its


it may be a driver problem try to update your computer or reinstall vista again

May 14, 2009 | OKI C5100n Laser Printer

1 Answer

Computer not communicating with printer


You stated that you just got a new computer and are trying to hook up your old printer to it. Here is the Lexmark website to download new drivers for the VISTA? operating system driver for your printer. Use the control panel printer install along with the new downloaded driver.Whee asked where the driver is, just let it know where you placed it. I would first uninstall the printer .
http://downloads.lexmark.com/perl/downloads/downloads.cgi

Dec 28, 2008 | Lexmark JetPrinter X1185 All-In-One InkJet

1 Answer

Computer not communicating with printer


Have you updated Vista with the Update for Windows Vista (KB925528)..
Brief Description........
This is a reliability update. Install this update to resolve reliability issues with some USB hardware devices and controllers. ( Validation Required ).....
I hear that this update helps a lot of printer communicating problems...
Hope this helps..
Please rate this solution if it helps you.... Thank You...

Nov 02, 2008 | Lexmark X1240 All-In-One InkJet Printer

1 Answer

Computer will not communicate with printer


Go out to Lexmark web site and look for a vista update in their software download section. So this should solve your problem.Most of the cds which come with equipment do not contain vista software and drivers.

Aug 06, 2008 | Dell 962 Photo All-In-One InkJet Printer

1 Answer

Computer will not communicate with printer


Ckeck in control panel & se if the driver software installed. It should be listed in Add/remove programs. If it is, power up the piinter & load windows Vista update service. See if Vista has any patches for you're printer. If no, goto Lexmark & go to the driver section for you're P4350 printer software for Vista. While in Vista update, install any updates listed.
Click on the link provided.
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:479:0:0&searchLang=en&os_group=Windows%20Vista&target=
Creat a folder on you're desktop & down load the latest driver software in-to the folder you created. Uninstall any Lexmark software that might have been in add/remove programs. Install the driver software you downloaded. If all this still fails, call Lexmark since this is a new printer. The number should be in you're manul. Or you can go here for free support.
http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596_652569481_0_en,00.html

Luck!
Mike

May 29, 2008 | Lexmark P4350 All-In-One InkJet Printer

3 Answers

My printer has a problem communicating with my windows Vista computer


Please check to make sure your cables are all plugged in all the way. If one of the cables is loose (power or data (at either your computer or your printer)) it could be causing this problem.

Apr 24, 2008 | Lexmark Z640 InkJet Printer

1 Answer

Logitech QuickCam STX vista compatibility?


Have you updated DirectX?, I'm not sure if Vista has DX9.0 or 9.0c, but you could try and update DirectX before you install the cam software. Also if the cam is usb, did you install the software "before" connecting the cam?, some people aren't aware that usb devices have to have the software installed first, before connecting the device.

Jun 11, 2007 | Logitech QuickCam Communicate STX Personal...

Not finding what you are looking for?
Dell A960 All-In-One InkJet Printer Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

color wheel light...
color wheel light...

Level 2 Expert

138 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...