Question about Philips Philishave HQ642 Electric Shaver
I am having philips electric shaver model hs358 its outer body has been cracked/broken.i need to change is body. *santosh b gupta, sakkar sath,amravati 444 601 vidharba india
Hi, You can purchase a new charging cord from electricshaver.com for around $23.00 which is probably the best thing to do if you want to keep using the shaver.
Otherwise the specs for the shaver are as follows:
Here's a link to the part you're looking for, should you decide to purchase a replacement instead of trying to make your own charger, which will be difficult unless you have the full array of electrical components and ability to fabricate it.
You can also give them a call at 1-888-476-1785
Hope you find this Very Helpful and best regards!
Posted on Oct 24, 2009
Remove 2 screws on the back to remove outer cover. Once removed, you will see 3 more screws that must be removed on the inner cover. Remove screws and cover to get to the battery.
When installing the battery, I suggest that you use a modified installation technique. This is to break the tabs off of the old batteries rather that removing them from the circuit board. This allows the old batteries to be removed but leaves the tabs attached to the circuit board. You can them solder the tabs from the new batteries to the old existing tabs
You will find a battery for your shaver at shaveroutlet.com. See link below.
Posted on Feb 12, 2010
This model is rechargeable and has internal batteries. You will find replacement battery pack at shaveroutlet.com. See link below
Posted on Apr 13, 2010
SOURCE: i have philshave hs840 shaver.
You will find replacement blades at shaveroutlet.com. See link below
The covers are no longer available
Posted on Oct 18, 2010
You will find the correct replacement battery at shaveroutlet.com. See link below
To replace, start by removing the back cover by taking out the two screws. Lift off the back cover to access the battery. For easier replacement, it is suggested that you use a modified installation technique. This is to break the tabs off of the old batteries rather than unsoldering them from the circuit board. This allows the old batteries to be removed but leaves the tabs attached to the circuit board. You can then solder the tabs from the new batteries to the old existing tabs
Posted on Nov 15, 2010
Tips for a great answer:
Oct 07, 2011 | Philips Norelco 8175XL Electric Shaver
Apr 09, 2011 | Philips Philishave HQ7850 Electric Shaver
Nov 17, 2010 | Braun 360° Complete 8985 Electric Shaver
Oct 18, 2010 | Philips Shavers
Sep 30, 2010 | Braun Syncro 7680 Electric Shaver
Sep 10, 2010 | Philips Shavers
Jul 21, 2010 | Philips Philishave HQ8150 Electric Shaver
Jun 29, 2010 | Braun 7000 Series Foil and Cutterblock
Apr 12, 2010 | Philips Philishave HQ7782 Electric Shaver
Mar 05, 2010 | Philips Shavers
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: