Whirlpool ed25smxlnro wiring green and red plugs

attach the red,black and white wires on new cord to the terminal block and attach the green wire on the cord to the cabinet their should be a green screw very near the terminal block but if not attch the green wire onto the cabinet on a spot near the block that looks something like this

_____
___
__

Go to the following:
selfhelpandmore.com/switch-outlet/dryer-circuit-wiring-and-hookup.php
Please rate me

On the back of the dryer where the plug wires in you'll see 3 screws. The white and green wires go together in the middle. look at the left and right screws and you'll see wires connecting to them from inside the dryer. just match the wires, put the black on the black and the red on the red.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

Black to one side of 115
Red to the other
White Ground to the middle
Green to case.
Please rate me if this was helpful
Leo Ponder
[email protected]

Green goes to white.

To install your 4 wire plug ,the white wire goes to the center wiring terminal on the dryer. The green ground wire attaches to the terminal cover screw outside the dryer. The red and black wires go right and left on the dryer terminal.

Black and red go to the outside terminals, white goes to the middle, and green goes to the frame of the machine.  You can look up at the wires coming down to the plug terminal and match up the colors.  Your ground is green and goes to the frame of the machine.  Green is the wire that is supposed to pop the breaker and prevent you from getting shocked so make sure you hook it up to the frame.

The following link explains how to convert your dryer from 3-wire to 4-wire:

http://www.fixya.com/support/r793520-3_prong_4_prong_power_cord_conversion

If you have questions, or require further assistance, please let me know. I hope this helps you.

the red to red.. black to black (outside screws) or vise versa doesn't really matter.. white to center screw green to cabinet..the green wire already attached to green screw should to taken off and either cut off or taped off it can be just connected back to center screw for future use

keep looking, there are many options still.