This error indicates that the waste toner bottle is full
Remove the small cover on the lower left hand side( one screw only) and remove the waste toner bottle and emptied it ensure that bottle neck is not clouded with toner otherwise even the bottle is empty still it will detect waste toner is full .hope this will help
I have a toshiba e-studio 160 photocopier and i need to know the password. The admin in charge of...
(More)
I have a toshiba e-studio 160 photocopier and i need to know the password. The admin in charge of the photocopier has left but did not write down the current password. Most of the photocopiers in the building have had their defult password ie 12345/123456 changed. I read that it is possible to show the admin password by first pressing 0&8 while turning the machine on and then typing 263 and pressing start. The first part is fine but when I type in 263 it doesnt' return any information. Do i have to type another number for the 160 series? Thankyou in advance
I have a Canon 210s / F139800 that is connected to the local network but I cannot access the printer...
(More)
I have a Canon 210s / F139800 that is connected to the local network but I cannot access the printer through the network. Any suggestions on how to configure the copier/fax/printer to allow access / verify that access is available?
It displays screen to turn off and back on. Error code E00012-002 is there anything i can do to fix...
(More)
It displays screen to turn off and back on. Error code E00012-002 is there anything i can do to fix this?