Question about Husqvarna 28cc Gas Line Trimmer

2 Answers

Starts up fine then looses power in a few minutes

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,040 Answers

Check the fuel lines for cracks/breaks. If they are o.k., then:

You will need to disassemble the carburetor and spray with carb.cleaner. Make sure the small screen is free of debris. (Should be able to see daylight through it.)

Use a Den Tek Brush, (http://www.drugstore.com/products/prod.asp?pid=165357&catid=1152),to clean the small portals in carb. These portals can become blocked. Reassemble and start.

If the carb. parts are more than 4 years old, you may have to replace them.

If you need further assistance on:
1. Fuel line replacement or
2. Carburetor kit replacement

Just let me know.

Jim

Posted on Jul 03, 2009

  • Jim Parker
    Jim Parker Jul 06, 2009

    Did this solution solve the problem?



    Jim

  • Jim Parker
    Jim Parker Nov 26, 2009

    Thanks for the rating.

    If you should have any questions about
    "Drywall Finishing/Patching", or know someone who does, put your
    questions to Category:"Tools- Building & Power- HAND TOOLS" at
    FixYa.com

    Thanks Again,

    Jim



















×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Is there a litle bubble on the side of it and if the is make sure it has gas in it,

Posted on Jul 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

18 month old LG 43" LED TV. Screen goes dark, but can be seen if you hold a flashlight up to screen. Sound is fine.


The inverter supplies the voltage to activate the screen. There are usually 2 boards, a slave and a main board. Sounds like one of them is leaking voltage and causing the screen to go dark after the initial start up. Make sure you didn't joggle something loose while you were replacing the power board check all connections. GL

Aug 26, 2016 | LG Televison & Video

1 Answer

2000 Pontiac Montana that starts and runs fine for 7-12 min then looses throttle power. Sputters at 1k-2k for 10-15 min then runs fine for 7-15 min then runs even worse, wills sputter at 750+ rpm.


3.4L Engine Sensor Location Pictures and Comments

www.greatautohelp.com/sensor-location/3400-Sensor-Comments-2.html
the battery for a few minutes to see if that helped. ... If the gauge is at half way on the first start, then yes, either the ... All of a sudden I could not accelerate and the carelost power. ... But once the temperature gauge goes to normal it will run fine. ... 3-7-12. I replaced head gaskets and intake gaskets on my 2000 Pontiac 3.4L

[PDF]2000 Pontiac Montana Owners Manual - GM Extended ...


Nov 28, 2015 | 2000 Pontiac Montana

1 Answer

Was driving my 1991 Honda Civic two days ago and the check engine light came on, the car lost power but the engine was still on, turned engine off waited a few minutes car started the check engine light...


distributor module.... any recent tune-ups? e.g= cap,rotor,wires,plugs? parts are reasonably priced and labor should be around 1 hour... start there...

Mar 07, 2011 | 1991 Honda Civic

1 Answer

My AKAI PDP4273M 42" Plasma has thin horizontal lines that flicker across the screen and then the picture jumps and flashes red and green distortions on the screen acts like interfearance of some sort if i...


This sounds like a loose solder joint, or overheated component. I know this may sound like a **** question, but have you tried tapping the TV to see if it goes away? If it does, you will need a tech to re solder the loose component. I have also seen this type of line and color bleed problem, believe it or not from poor cabling or loose connections.

Mar 09, 2010 | Akai PDP4273M Television

2 Answers

2001 Suburban electrical. 100k. Intermittant elec. power?


it may sound like you have a faulty batterie. it could be a short cut inside it that come and goes. Try another battry. Good luck!

Aug 29, 2009 | 2001 Chevrolet Suburban

1 Answer

Power


are you sure your get ac power, im thinking you ac plug in the computer is loose.

Dec 17, 2007 | Compaq Armada M700 Notebook

Not finding what you are looking for?
Husqvarna 28cc Gas Line Trimmer Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...