Question about Printek FormsMaster 8003 Matrix Printer

1 Answer

Keeps messing up print heads. i just replaced one about a month and a have ago. and i am having with it again. it is tearing paper and missing dots .. i had replace one another one 6months eariler.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

Hello,

It seems to me like you have a gap issue but I was wondering if you might be able to call in and talk with my technical support team. They have 10+ years experience on Printek Printers and we are an ASR for Printek. We carry new and used parts for all Printek printers.

Technical support is free and can save people a lot of money.

Please give me a call and ask for Rory, I will then transfer you over to technical support.

Thanks,

Rory Cardenas
Midrange Repair and Parts
3821 W. 127th Place
Alsip IL 60803
708-597-4222 x240
rcardenas@mrp.to
AOL IM: RORYMRP

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I print a multiple page document on tear paper roll, the first page prints correctly but the pages after that start printing too near to paper tear size or up to paper tear size. What should I do


Sounds like your top margin is not either not set properly or your documents do not have page feed command at the end. Are you sure you have the correct driver installed?

Nov 23, 2014 | Epson Dot Matrix LQ-2090 Printer

2 Answers

Hi! I installed new ink cartridges almost a month ago and that same day I had no problem printing. 1 week later it was printing extremely faded. Thought it was a fluke, but tried again tonight and it's...


Hello!
We all as a canon printer consumer is needed to use Pro dot ink to refill. Please remove your cartridge and clean up the cartridge head tightly by soft/toilet paper and replace again. If it doesn't work clean it again and again... thanks

Sep 13, 2011 | Canon PIXMA MP160 All-In-One Printer

2 Answers

There are 3 small dots that print across each page when I print. How do I get rid of those?


what type of printer, laser or inkjet. are the dots spaced down the page or across?

I suspect you have a laser and the dots are down the page in which case it is most likely the fuser unit or the cartridge.

To verify which, you can send a print to the printer and open the printer half way through. If the dots are present before the paper goes through the fuser (the hot bit that fixes the toner to the page) then its the catridge, otherwise it will be the fuser unit. you will need need to replace which ever part is the cause

Sep 02, 2011 | Brother Office Equipment & Supplies

1 Answer

Printed out a inkjet magnet sheet now won't anything else! Help!


OK Christina, did the whole magnet page come out without any missing tear outs or pieces? You probably have a stuck piece of sticky paper in your feed or rollers. Look in your manual for clearing paper jams and examine your rollers while your at it from stray pieces of paper.

Jun 27, 2009 | Office Equipment & Supplies

2 Answers

Brother dcp 150c pinting out of focus / blurry


YOu need to Do Print Test First I suspect One of the Color have Missing Dot..If the Print Quality have missing dot on The 4 colour the print our will blur ....The aligment of the print head maybe swicted ......Need to Be purge Or Replace new print Head...usually print head needed to be replace...

Nov 01, 2008 | Office Equipment & Supplies

2 Answers

Casio cash regester TK7000 print head gewing ink tape


Hi.
I think you are describing the problem where the print head is jamming, as it is getting stuck in the ribbon, so I will focus on that problem.
If this is not the problem you are having, then could you please try to describe it more accurately?

I get this problem all the time. The symptom is almost always caused by the printer being run without paper in the right hand side (the journal side). You must run paper in BOTH sides of the printer, or you will damage it. If your printing has been poor (one dot missing on characters), this is also a sign that this has happened.
Please let me know if you have been running both rolls of paper or not, and I can suggest some things to try.

Mark

Jul 14, 2008 | Casio Parts Cash Register PC Desktop

1 Answer

Horizontal colored lines through grayscale printed photos


Hi George,

It sound's like an ink-feed issue:

1) Dirty heads, even after cleaning
2) No-ink or poor quality ink
3) Damaged head: some are part of the cartridge, some are not
4) Air bubbles in ink

The test page is typically not as hi-res nor as saturated as a
photo print. The hi-res photo puts the greatest demand on the print head.

The color lines you see are actually lines of missing color,
where the head has failed to deposit ink, so one or two primary
colors are missing from the complete picture.

For example missing yellow will make a blue line.
Missing magenta will make a green line
Missing cyan will make a red line.... etc..

Clean the heads again and again, print again and again,
hoping to flush the system.

BUT, keep in mind that cleaning wastes huge amounts of
ink and tiny little cartridges of ink cost more than many new printers.

Martin

Apr 24, 2008 | Canon PIXMA iP90 Mobile Printer

1 Answer

Images on copies


your teflon sleve triangle cut
replace fuser teflon sleeve

Feb 22, 2008 | HP Color LaserJet 2600n Printer

1 Answer

Printing problem with Star Sp200


Seems like a problem with the printer head...It is usual for matrix printers and it happens due to wear and tear..You will have to get the printing head to get replaced..

Oct 27, 2007 | Star Micronics SP 2000 Matrix Printer

Not finding what you are looking for?
Printek FormsMaster 8003 Matrix Printer Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printek Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

77201 Answers

Are you a Printek Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...