Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

1 Answer

My Craftsman 139.53879 remote won't learn the code of my 1/2 HP craftsman receiver type 132C2105-3B. I followed the directions to push the transmitter button and hold the receiver button down until the opener light blinks, and it will never blink, plus the remote just won't work. The door opens and closes fine from the wall switch

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,197 Answers

I have no idea what a 132C2105-3B is but try this. Hold the button down on the remote and then press and immediately release the smart/learn button. If the remote is the correct one for your opener it should work.

Posted on Jun 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sears craftsman 1/3 hp garage door opener manual


Press and hold the "LEARN" button on motor unit until the "LEARN INDICATOR LIGHT" goes out (approximately 6 seconds).

All previous codes are now erased.

Apr 26, 2014 | Husqvarna Original Sears Craftsman...

1 Answer

My craftsman 1/2 hp garage dood does not close when it's cold out (with either a push on the remote or a single push from the wall). I have to hold the wall button in until it's completely down. When I do...


Make sure the brackets for the sensors are tight and the small light on the sensors is not blinking ever so slightly. You also might try shading the sensor so that the sun is not shining directly into the lens.

May 20, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

How do i program my remote


What type of remote? Wireless. Craftsman/Sears unit? Push LEARN button on logic board on motor and punch in your 4 digit code and ENTER. Light bulb on motor will blink 2x if correct.

Dec 17, 2009 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

Craftsman 1/2 HP Garage Door opener problem


The remote and the keypad work through a signal sent to the receiver while the wall console, as you said it's wired directly to the opener, so it's likely that the receiver is shot. I'd try reprogramming the remote to just rule out the chance that all code wasn't erased first. (Press the learn button on the back of the operator head, stand back 5 feet and within 30 seconds slowly press the remote button a few times to see if it operates the opener). If this doesn't work, you can install an external LiftMaster universal receiver with the correct frequency and you should be good.
If there's a purple antenna hanging off the head, this is a 315 freq, use a 356LM, if black it's a 390 freq, use a 635LM receiver.
Then you'll have to reprogram your remote and keypad to the receiver.
Since there's also the issue with the light, there's also a possibility the circuit board got fried. Did you have any storms lately?

Aug 07, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Craftsman GDO - Remotes not working


I think this is an easier way to program. Press and hold the button on the remote and then press and immediately release the smart/learn button on the rear of the motor unit. Do this for each remote you have.

Jul 28, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I have a Craftsman 1/2 HP model #13953975SRT1.


It is normal for it to blink randomly. If you watch it while you press your remote you will see what it looks like when it is receiving a properly coded signal.

May 31, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Programming kepad for Sears Craftsman Garagedoor opener 1/2 hp


The only procedure I have ever followed is to press the learn button and then enter the code, and not do anything else. I think your last step of holding the button until the light goes out is clearing codes as fast as you enter them. Just stop after you enter your code and let the learn mode time out on its own. That should do it.

And don't put your head through the wall. It just causes more headaches.

Feb 21, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Wireless Keypad wont allow use of other door openers


hit learn button for 10 seconds. now nothing will work except wired buttons. Hit learn for 1 second and put in yur 4 digit keypad code and hit enter, light on motor will blink twice. hit learn again for 1 second and push button on remote. again bulb will blink. continue pushing learn for 1 second and adding another remote.

Dec 26, 2008 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+ Logo

3,055 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sears Building Materials Experts

Glenn Mayer
Glenn Mayer

Level 2 Expert

91 Answers

Mike

Level 3 Expert

4340 Answers

Cindy Wells

Level 3 Expert

5187 Answers

Are you a Sears Building Material Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...