An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: Flashes Ld midcycle
“F21” (AKA SD) is a Long (SLOW) Drain error (LD). If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line. You will need to check the following:
1.First, attempt to unplug the washer for at LEAST 30 minutes to reset the Central Control Unit (CCU). Sometimes this is all that is required to correct momentary glitches with the unit. If the error code returns, proceed to step 2. 2.Check the drain hose to make sure it is not kinked or clogged. 3.Check the electrical connections to the pump and ensure the pump is running. 4.Remove the drain pump filter and check for foreign objects and/or debris. To check the drain pump, click on the following link for step-by-step instructions
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
well about the only thing that I would recommend a operator try and do with these is replace the oil or top off the oil in the hydrostat as there is lots of tiny springs and ck-balls and disks and things inside there that would be rather difficult to get back correctly if you not super experienced with them and believe it or not just adding oil or replacing it fixes a lot of them too of course there is allways the reason it leaked out in the first place too..
You didn't exactly say what is happening, not engaging, disengaging, not working??/ Trigger too light,? I had a 700 with a stubborn safety, would not klik on at all, also had an hk 770, same thing, I never bothered to fix it, I just never used it. It was always ready to fire, or empty was the way I left it, had to rack the action to use it.
It is nothing wrong with your mp3 device. It is the usb connection, in itself. I use to have friends who bought it and experienced the same thing. Sorry for the inconvenience of your device. These companies should really make better products.
11- no start since battery disconnected. 12- battery has been disconnected recently. 22-Coolant temperature sensor, bad connection or faulty. 44-signal to smec (engine computer) was interrupted, or is not present. 55- is end of codes.
What exactly are you experiencing as far as starting and driving goes. The only code I see right now that I would worry about is the coolant temperature sensor, if you are experiencing poor running, starting etc. The signal to smec, may have been a one time thing, if vehicle runs.
ok take it nice n slow remove da back of da dryer after unplugging it the long silver can is da drying element close to da top is 2 two red wires connected to a thing take da wires off replace it if u call me i can tell how to fix
The problem you are experiencing is closely related to the dreaded RROD (Red Ring of Death). It has the same causes and solutions. I suggest getting an experienced person to repair your console for you. Take care that no one is doing the "Towel Trick" instead of an actual repair.
I run an electronics repair business and would be happy to fix your machine for you, email me at Jordan@jordanselectronics.com for more info
Well what you experienced is a common thing with the chocolates. I have gotten 8 replacement chocolates, and everyone has done the same thing. There really is no hope for these, and it upsets me a little that no one can explain why they constantly have issues, and can't be fixed. Hope this isn't too late.