Question about Kenmore 22422 Top Load Washer

Open Question

My whirlpool LSR7233EQO fills up for rinse but won't spin on any cycle

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: shutting down on rinse cycle

Hi this could means that you may need to replace the washing machine bearings. Once the bearings are bad, the motor overheats and it will automatically shut down after the first rinse.

Timonty from WashingMachineAdvisor.com

Posted on Sep 02, 2008

Ad

SOURCE: Whirlpool Model LSV6234AWO

door switch bad?

Posted on Oct 18, 2008

SOURCE: won't complete cycle, stops at rinse. and can't get hot water.

Are you on well water? turn off the cold water to the washer and clean the screen filter out. do not leave filter out.
the machine probably has a cold only final rinse so it won't work properly.

Posted on Apr 04, 2009

  • 686 Answers

SOURCE: kenmore washer,mod# 110 26292694/wash cycle only

CHANGE THE LID SWITCH

Posted on Apr 09, 2009

  • 1 Answer

SOURCE: Washer will not Spin during SPIN CYCLES

Check the lid switch. Through out time the lid switch housing can come apart from years of heat and cold. When I checked mine, I found the glue deterriated and the housing came apart. What I did to fix it is I zipped tied the housing together and did a functional check and it worked.

Posted on Apr 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool washer model lsr8233eqo


So when the cycle first starts, it will fill and agitate and spin. But then on the rinse cycle it stops?

Feb 03, 2013 | Whirlpool Washing Machines

1 Answer

Frigidaire FWT647GHSO when it gets to rinse first rinse cycle, it doesn't stop filling with water. It won't agitate or spin. It works well in the wash cycle, agitates and spins and advances


probably you've got something blocking the water pump from doing its job properly so check that the water pump is free running emptying all the water if not then there is a blockage in the pump normally ist a button, paper clip or other debris out of a trouser pocket eric

Dec 25, 2017 | Frigidaire Washing Machines

2 Answers

This is for a Whirlpool washer and dryer thin stack. All four of the wash cycles work AND all four of the spin cycles work, but the rinse cycles do not work. I have to manually skip it forward past the...


Hello,

I would suspect the water inlet valve as being the problem,if it drains the water and spins the lid switch is going to be good.The thing exclusive to rinse cycles is that they only fill with cold water,and that is what i suspect the problem being is that it's not filling with cold water on the rinse cycle because of a bad water inlet valve.


GENE

Sep 12, 2011 | Washing Machines

1 Answer

Hi...my washer goes through cycles and then stops at "light" . It won't go through rinse and spin. Help


Make sure your cold water tape is turned on and the screen in the water valve is not plugged up, it may be trying to fill with cold water and cant get any, try filling the washer with cold water on a "wash" cycle to confirm it it fills with "cold" then just the rince cycle ion the timer may be faulty and would need to be replaced

Aug 25, 2011 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirlpool Ultimate Care II


sounds like a broken coupling.
it probably don't agitate either.

Oct 28, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Basin will not fill with water during rinse cycle but will agitate and spin.


most new washers have cold water only rinse and spray rinse ck cold water coming into machine during wash if no cold comes in suspect cold side of fill vale not opening ..could be wiring issue or a bad valve

Oct 24, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

2 Answers

Whirlpool filling and washing, not draining, rinsing or spinning


Check out your outlet filter, probable it is clogged. Clean this out and refit. Most cases when the drain or spin does not work, it is the filter. This is a suggestion.

Apr 01, 2007 | Frigidaire FWS833A Top Load Washer

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Jim Chinnery
Jim Chinnery

Level 1 Expert

10 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...