Question about Kenmore 22422 Top Load Washer

Open Question

My whirlpool LSR7233EQO fills up for rinse but won't spin on any cycle, any suggestions?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: shutting down on rinse cycle

Hi this could means that you may need to replace the washing machine bearings. Once the bearings are bad, the motor overheats and it will automatically shut down after the first rinse.

Timonty from WashingMachineAdvisor.com

Posted on Sep 02, 2008

Ad

SOURCE: Whirlpool Model LSV6234AWO

door switch bad?

Posted on Oct 18, 2008

SOURCE: won't complete cycle, stops at rinse. and can't get hot water.

Are you on well water? turn off the cold water to the washer and clean the screen filter out. do not leave filter out.
the machine probably has a cold only final rinse so it won't work properly.

Posted on Apr 04, 2009

  • 1 Answer

SOURCE: Washer will not Spin during SPIN CYCLES

Check the lid switch. Through out time the lid switch housing can come apart from years of heat and cold. When I checked mine, I found the glue deterriated and the housing came apart. What I did to fix it is I zipped tied the housing together and did a functional check and it worked.

Posted on Apr 25, 2009

jumptrout51
  • 3361 Answers

SOURCE: kenmore 80 series washing machine - won't stop

Your air pressure tube going to the water level switch is pinched or stopped up,OR, the water level switch is going bad.
Use this manual to access these parts and diagnose which is bad.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb?OpenDocument

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool washer model lsr8233eqo


So when the cycle first starts, it will fill and agitate and spin. But then on the rinse cycle it stops?

Feb 03, 2013 | Whirlpool Washing Machines

2 Answers

This is for a Whirlpool washer and dryer thin stack. All four of the wash cycles work AND all four of the spin cycles work, but the rinse cycles do not work. I have to manually skip it forward past the...


Hello,

I would suspect the water inlet valve as being the problem,if it drains the water and spins the lid switch is going to be good.The thing exclusive to rinse cycles is that they only fill with cold water,and that is what i suspect the problem being is that it's not filling with cold water on the rinse cycle because of a bad water inlet valve.


GENE

Sep 12, 2011 | Washing Machines

1 Answer

Washing machine isn't spinning to drain water


suggest that the drive belt is worn and slipping under exess load solution replace belt regards billnkaym

Apr 02, 2009 | Whirlpool LSQ8543J

2 Answers

Washer will fill fill with water but doesn't start wash cycle


it will fill but won,t spin, will throw out water as if it washed, then it take water to rinse but won,t spin ,then will throw out water as if it did , but clothes are soaked

Feb 21, 2009 | Roper RAS8445KQ Top Load Washer

1 Answer

Whirlpool Washer will not progress to the rince cycle.


that is either a problem with the timer , or with the cold water hose at the back of the machine, see the following:



I quote from : The cycle doesn't advance

The cycle doesn't advanceWhen the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It'sthe timer, if your washing machine fills with water and beginsagitating, but the timer never advances--or if the washer is in a spincycle and the timer won't advance. Then you need to replace the timer.


  • Itmay be a cold-water supply problem, if the washing machine fills withwater, agitates, drains, and spins, but then doesn't fill with rinsewater. See There's no cold water.

  • Nov 20, 2008 | Washing Machines

    1 Answer

    Whirlpool Ultimate Care II


    sounds like a broken coupling.
    it probably don't agitate either.

    Oct 28, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

    2 Answers

    Whirlpool filling and washing, not draining, rinsing or spinning


    Check out your outlet filter, probable it is clogged. Clean this out and refit. Most cases when the drain or spin does not work, it is the filter. This is a suggestion.

    Apr 01, 2007 | Frigidaire FWS833A Top Load Washer

    Not finding what you are looking for?
    Kenmore 22422 Top Load Washer Logo

    Related Topics:

    49 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Washing Machines Experts

    fordexpert

    Level 3 Expert

    5692 Answers

    Kristen Denison
    Kristen Denison

    Level 1 Expert

    13 Answers

    Jim Chinnery
    Jim Chinnery

    Level 1 Expert

    10 Answers

    Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...