Question about Computers & Internet

1 Answer

My tft hpl1908w,is not starting up immediately when i switch on my pc.you have to switch off and on again several times so that it can start up.but onece started up there is no problem untill you switch it off and let it to cool down for several hours.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

HP SUPPORT COMMUNICATION - CUSTOMER NOTICE Document ID: c01764371
Version: 1
Notice: HP Flat Panel Monitors - Pressing Menu Button Or Power Button Has No Effect Other Than To Display A Warning Message NOTICE: The information in this document, including products and software versions, is current as of the Release Date. This document is subject to change without notice. Release Date: 2009-06-05
Last Updated: 2009-06-05
DESCRIPTION Many newer HP monitors have a feature that allows users to disable the front panel Menu and Power buttons. When they are disabled, pressing them has no effect other than to display on-screen warning messages.
DETAILS If the Power button is disabled; pressing it displays this message:
Power Button Lockout
If the Menu button disabled, pressing it displays this message:
OSD Lockout
The buttons can be re-enabled as follows:
If the Power button is disabled, press and hold it for 10 seconds to unlock it.
If the Menu button is disabled, press and hold it for 10 seconds to unlock it.
NOTE If the Power or Menu buttons are not disabled, pressing and holding them for 10 seconds will disabled them. Here's the site.....
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=3548687&prodTypeId=382087&objectID=c01764371

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lcd is hpl1908w its display goes of 5 minutes on first starup and when its displays goes off i on and off the monitor display comes for fews seconds and then goes off again lcd light is green but...


well if your lcd has no bulge capacitors test your tft lamp both top & down of the screen( particularly top) with spare tft lamp. or use another screen to test it. secondly, test the c5607 transistors in the inverter section but if you know how to use spare tft lamp very well , you will easily detect between your screen & the inverter

Aug 06, 2015 | HP L1908W 19" LCD Monitor

1 Answer

Motor tried to start but couldn't, was using long


I'm assuming that your on/off is a lever or switch built into the pressure switch. If so, the pressure switch sounds like the problem.

Nov 14, 2009 | Air Tools & Compressors

1 Answer

LCD Monitor does not start up with PC


We aim to please.

You aim, too, please, rate accordingly.

May 08, 2009 | Acer AL2016W 20" LCD Monitor

1 Answer

Mother board 845 LDA as i switch on LED Blinks & Processor Fan Momentarily Starts then it gets off


I have built quite a few PCs and I have often found the same problem when trying to boot for the first time. An old trick that might help is to repeatedly energize then drain the PC electricity.
Do this by plugging in the PC momentarily then unplugging it then immediately pressing the power button on the PC while there is no power hooked up. Do this several times over and over again in quick succession. Finally turning on the PC with the power connected. If the power supply on the PC has a switch on it you may use that instead of actually plugging and unplugging.
Also you might try pressing and holding down the "ins" or "insert" key while powering on the PC.
Hope this helps.

Apr 25, 2009 | Intel Motherboard

1 Answer

Lenovo laptop does not start at every power on button push


Please check you laptop battery in the nearest service station.

Mar 17, 2009 | Lenovo 3000 N100 0768 - Pentium Dual Core...

2 Answers

Screen is completely black


There is a switch on the right side of the unit labelled Video Out (switch facing front of unit) or TFT On (switch facing rear of unit). First make sure that the switch is on TFT on. If it is then switch to Video out and then back to TFT On. This made our screen starting displaying again when it was black.

Nov 19, 2006 | Durabrand DUR-1700 Portable DVD Player

1 Answer

Funny monitor problem


If I were you I would invest in a new video display card. Sounds your card is intermittant, because the chances of a tube type display and a TFT display having the same problem is slim to none. LOL Good Luck Please dont forget to rate this thread

Oct 20, 2006 | Samsung SyncMaster 540N 15" LCD Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...