MY EPSON STYLUS C88 HAS ERRATIC PRINTING, I HAVE DONE THE CLEAN HEAD ROUTINE MANY TIMES BUT AFTER A WEEK OR SO, THE PROBLEM RETURNS, THIS IS USED IN MY HOME OF PERSONAL USE. CP
Problem with ink flow. Use original ink or compatible? If original, ink will out and dried after head cleaning many times. If compatible, problem is ink quality.
When head cleaning, ink flow to head by suction of head cleaning mech. If use to print, ink at head spray out, but ink ank ink tank not flowing good to head.
Was this helpful?
Yes
No
Popular Solutions for Epson Stylus CX5400 All-In-One
Epson CX5500 cartridge error led blinking always
I have also change all the cartridge with new...
(More)
Epson CX5500 cartridge error led blinking always
I have also change all the cartridge with new one
But the condition are same.
Cant find out the reason.
I cant find any instructions on how to scan with my epson bx300f? I want to scan old photos then...
(More)
I cant find any instructions on how to scan with my epson bx300f? I want to scan old photos then ssve them to a memory stick, is this possible?? Thanks
my pinter does not pint well , it sucks the paper and it shots it uot ,but it prints afther giving...
(More)
my pinter does not pint well , it sucks the paper and it shots it uot ,but it prints afther giving me the paper
The piece of black foam that sits on top of the print heads has torn and now it won't print...
(More)
The piece of black foam that sits on top of the print heads has torn and now it won't print anything. Can I replace this foam? It's the piece to the left of the ink cartridges that sits in the bottom of the printer. I believe it fills with ink. Anyhow mine tore when the paper jammed.
Have a Epson Stylus CX5400. Have opened lid and replaced ink cart. while looking insided, noticed...
(More)
Have a Epson Stylus CX5400. Have opened lid and replaced ink cart. while looking insided, noticed elongated opening (plug) on bottom left-center side. Had black(dark colored ink in opening. Pulled plug out and noticed glob of ink in bottom. What's up and what do I do. It that suppose to all be down there as some overflow?Am concerned. Is there a fix, problem?