Question about Frigidaire ATF6000ES Front Load Washer

1 Answer

Atf7000ep code e20 - Frigidaire ATF6000ES Front Load Washer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 725 Answers

E20 is a general error code to get to the real problem try this..
Reading Error Codes 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. let me know what code come up... hope it helps

Posted on Sep 19, 2009

  • Franklin Ouchida
    Franklin Ouchida Sep 19, 2009



    E20 is a general error code to get to the real problem try this..


    Reading Error Codes
    1. Wake the washer by pressing any button.
    2. Wait 5 seconds.
    3. Press and hold the START/PAUSE and CANCEL
    buttons simultaneously. As long as the buttons are
    held, the failure code will appear in the display as
    an “E” followed by two numbers, a number and a
    letter or two letters. The control will beep and the
    Door Lock, Wash, Rinse, and Final Spin indicator
    lights will flash. let me know what code come up... hope it helps


  • Franklin Ouchida
    Franklin Ouchida Sep 19, 2009



    E20 is a general error code to get to the real problem try this..


    Reading Error Codes
    1. Wake the washer by pressing any button.
    2. Wait 5 seconds.
    3. Press and hold the START/PAUSE and CANCEL
    buttons simultaneously. As long as the buttons are
    held, the failure code will appear in the display as
    an “E” followed by two numbers, a number and a
    letter or two letters. The control will beep and the
    Door Lock, Wash, Rinse, and Final Spin indicator
    lights will flash. let me know what code come up... hope it helps


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire front load washer (ATF6000SF1) error E20


E20 is not an exact error code. It's indicating a possible pump out problem. Here is a few possible causes of an E20 error code:

1. Restriction in the drain pump

2. Failed pump

3. Water not pumping out fast enough (crimped drain hose)

4. Too many suds ( too much detergent or wrong kind)

5. Pressure switch (not communicating with control board)

6. Loose wire at pressure switch

7. Loose wire at pump or control board

8. Failed control board

Nov 29, 2012 | Frigidaire ATF6000ES Front Load Washer

1 Answer

I have a Kenmore Elite washer, model 44092. The machine won't spin and the error code is E20. What is wrong with it?


The machine, based on the error code, is made by Frigidaire for Kenmore. Error code E20 pertains to a slow or no drain problem which can be due to a clogged/kinked drain hose, blocked drain filter/coin trap, or a broken drain pump. The link below provides the detailed troubleshooting procedure of this error code.

Error Code E20 on Frigidaire and Frigidaire-made (including Kenmore) Front Load Washing Machines

Error Code E20 on Frigidaire and Frigidaire-made (including Kenmore) Front Load Washing Machines

Aug 20, 2011 | Washing Machines

1 Answer

E20 message want spin


E20 is not an exact error code. It's indicating a possible pump out problem. Here is a few possible causes of an E20 error code:

1. Restriction in the drain pump

2. Failed pump

3. Water not pumping out fast enough (crimped drain hose)

4. Too many suds ( too much detergent or wrong kind)

5. Pressure switch (not communicating with control board)

6. Loose wire at pressure switch

7. Loose wire at pump or control board

8. Failed control board

Apr 29, 2010 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Error code E20


Hello there
the Dreaded E20 fault is a drain problem
washer will show the E20 code and may not spin.
So i would first look for a clog in the hose right before the water pump there is a little cup in the black hose that could be full of suff if so empty the cup and it should work good after this
hope this will help you out
Best regards Michael

Dec 26, 2009 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

E20 code. Not draining


E20 is a general error code to get to the real problem try this..
Reading Error Codes 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. let me know what code come up... hope it helps

Jun 06, 2009 | Zanussi ZWD1470W Front Load Washer / Dryer

1 Answer

I have a 97 Buick Regal and I get a E20 error message:cd player


If the CD is over 60 minutes it will not play on domestic cars

May 29, 2009 | 1997 Buick.5 Regal

1 Answer

What does E20 code means on a delco cd player?


Hi E20 mean's
The CD player cannot focus on the disc or there is an internal focus problem.
try a known good CD and if it still displays E20 then you will have take it to a radio repair shop

May 10, 2009 | 1997 Pontiac Sunfire

1 Answer

AEG Lavamat Turbo 12830 - error code E20


Hi

E20 means there is a bolckage in there
remove filter and clear any debris in there and check impeller is turning ok.

regards

Mar 21, 2009 | AEG Lavamat 16810 Front Load Washer/Dryer

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...