Question about Philips 42PF9631D 42 in. Plasma Television

1 Answer

Phillips 42pf5321d/37 No picture Error code D3V3

I have the 42 inch plasma. We started out with 4 blinking red lights, then went to a steady green. I opened it up following other strings posted, I found a green diode blinking at the alarm code board. Blinks 4 times, code = D3V3. Also, when powering up, 2 LEDS "cold" power on and then off after about 4-5 seconds. Have already replaced main Y board.
Any ideas?
Thanks
DCS8463

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 822 Answers

Pls. check the power inverter.

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Philips 42pf5321d/37 that won't turn on.


send me a email sonny@tvcircuitboards.com and I can assist you with troubleshooting it to determine whats happening with the set.

Aug 07, 2012 | Televison & Video

1 Answer

No power to my Phillips 42 inch Plasma 42pf7321d/37, just a red blinking light


Most likely it going to be a power supply related problem. The red blinking light is a code for a TV tech to diagnose the problem on the power supply board itself or the board that regulates the power for the screen. Some manufactures call it a Backlight Inverter Board. A TV repair shop should be able to look at it for you and tell you which board is bad.
Replacement boards can be found at a good price at Shopjimmy.com

Sep 05, 2009 | Philips 42PF7320A 42 in. Plasma HDTV

1 Answer

I have a Philips Plasma tv 42pf5321d/37 with sound but no picture


Thats the great sound of Exploding capacitors on either the power supply board. or another one in there. Now the set is in fault protection. It tried to warn you with the RED blinking LED that there was something amiss by shutting itself down. When you unplugged you reset the error and allowed it to do it again.

Best Regards and Smper Fi

Jun 23, 2009 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

No Picture just 4 red blinking lights


Look For TWO 10 Volt 33000 mfd. Caps That Appear To Be Swollen,They Are Next To Each Other At The Bottom Of The Power Supply Board, Change Them To 16 Volt Versions.

Feb 03, 2009 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

Phillips 42PF5321D/37-Green power light, but no A/V.


bad powersupply, the powersupply has 4 voltages, +12, +5, -12 & +12 the led only tells you that the +12 is working.

Dec 16, 2008 | Televison & Video

1 Answer

Philips 42PF5321D/37 Error Codes


replacing ssb for 4 blink error was correct as error is communication failure specific to micro processor on ssb. getting an alternate error after replacing ssb would suggest either wrong ssb or defective ssb. verify vendor number on ssb tuner on original and new ssb and if same reorder that board and if not order per original board

Jun 30, 2008 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

42PF5321D/37


Measure the connector from the logic board to the power supply the second pin from the left it will say Vs_ On if the set has 3.1 volts the problem is the SSB or the logic board. On the logic board there should be a solid led and a flashing led that shown that data id flowing and the problem is the SSB. The SSB is easy to replace just remember what you tokk loose and from where. You probely will save money that way. If the set is in warranty or just out of warranty contact Philips 1-888-744-5477 and see what they can do first.

Jun 23, 2008 | Philips 50PFP5332D 50 in. Plasma...

3 Answers

Phillips 37FD9944/01S Plasma TV - Power Supply


dont waiste your money problem main or logic board or if shure power supply go radio shack and get one with specifications match voltage,ampers,and polarity

Mar 30, 2008 | Philips 60PP9352 60" Rear Projection...

Not finding what you are looking for?
Philips 42PF9631D 42 in. Plasma Television Logo

1,554 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...