Question about Mitsubishi WS-65819 TV

2 Answers

My Mitsubishi ws-65819 won't power up. When I use

My Mitsubishi ws-65819 won't power up. When I use the remote to turn on the tv, nothing happens. Same with the power button on front. I tried the diagnostic function( pressing menu and input on the front simutaneously and nothing happens). What could be the problem. I plug in the tv and you can "hear" the tv circuits power up, but again, nothing happens. I've checked the fuse and the pico fuses and all are okay. I have the service manual and checked the voltages at designated points on the circuit board and have the correct voltages at those points. Can you please assist? I just want it to work.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

Unplug it ,leave it unplugged for at least an hour.
now slowly plug back in , if you notice a small spark coming
from the plug when you plug it in that's normal

which means most likely the regulator or output tran is out.
is about 150.00 200.00 normal cost. no more.

If the plug doesn't spark at all when you plug it in slowly
could be a Fuse :>

Posted on Jun 28, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check for leakage of anti-freeze from the crt guns on the signal board.

if there is 'wetness' on the circuit then it's a write off, it's shot

Posted on Sep 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi Medallion WS-65819 wont turn on. Code 2-2


The power supply regulator section circuit inside should be troubleshooted.

Mar 28, 2013 | Mitsubishi WS-65819 TV

1 Answer

When we push the power button on the remote or on the tv the green light comes on for one second and then shuts off ... tv won't turn on


you have a short circuit in the power supply.
1) test the power cord very well
2) test the main swithc for short or open
3)test the power supply, look for a short in transformer+coil+filter+diode+rectifier. and replace
4)test the HVRECT+fLYBACK+ horizontal output for +125Vdc +vertical output for +80Vdc ALL this go to the CRT
color +12vdc+other circuit +12vdc. The first thing do you will have is RASTER, see the block. d
God bless you
8_1_2012_7_42_19_am.gif

Jul 31, 2012 | Mitsubishi WS-65819 TV

1 Answer

WHAT IS WRONG WITH MITSUBISHI TV MODEL WS65819 THAT POPS ON AND OFF?


shutdown is happening= If set has been unplugged plug it back in and turn set on--when green power light goes off in a few seconds:

On front of set (not the remote) press and hold both the Menu and Input (Device) buttons at same time and hold for at least 5 seconds---then release both.

Power light will blink an error code like 2 blinks, 2 blinks pause and repeat it for a total of 5 times.

Let me know what error code is and I will tell you what it means.

SD TECH

4_26_2012_2_07_18_pm.jpg

Apr 26, 2012 | Mitsubishi WS-65819 TV

1 Answer

Have a Mitsubishi WS-65819 (about 9 yrs). over past 3-4 weeks the color started to skew (3D like arch on top and bottom), then yesterday, the TV totally powered down and will not power up, totally dead. ...


You lost your convergence IC's and possibly a resister or two that are in the same circuit. If you are good at Soldering, this should be somewhat of an easy fix. I believe you can still get the IC's for this set.

Aug 09, 2011 | Mitsubishi WS-65819 TV

1 Answer

Model CS- 40307 40 inch Mitsubishi TV will not turn on


continue to push power button until light turns green. verie rate of push and hold

Jul 15, 2009 | Mitsubishi WS-65819 TV

1 Answer

Mitsubishi WS-65819 Sender Board problem


yes it can the cost is $350 sumwut dollars ,i got my tv for $54 and thats wut was wrong with it ,the board that is connected to your power cord is wut needs to be replaced sears can do the job but the labor is $200

Nov 30, 2007 | Mitsubishi WS-65819 TV

1 Answer

Mitsubishi WS-65819 TV Problem


it the circut board that is connected to the power cord ,

Nov 26, 2007 | Mitsubishi WS-65819 TV

Not finding what you are looking for?
Mitsubishi WS-65819 TV Logo

838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1229 Answers

The Knight
The Knight

Level 3 Expert

75404 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...