SOURCE: just setup my Belkin router and I cant get a
Hi,
>>>>Connect any of the computer to the router using a cable
>>>>Open the internet explorer page and in the address bar enter the numbers 192.168.2.1
>>>>On your left hand side you will be able to see Firewall
>>>>Click on firewall
>>>>It will ask for the password
>>>>Leave the password and click submit
>>>>Disbale the firewall
>>>>Click on apply changes
THANKS....
With Regards......
Vaishu
SOURCE: G + MIMO Wireless Belkin Router - I cannot connect
Did you configure the router, to select:
1. SSID, the "name" of your network;
2. encryption-level. Hint: use 'WPA' or 'WPA2'.
3. password to your network.
If so, then enter the SSID/password on the iPad, to connect to your network.
SOURCE: trying to connect my ipad
Before you start :
Make Sure the Wireless Switch on your Computer is turned Off (If you are using a laptop to connect to the router )
Make sure that the Light on the Router is Solid Green
Step 1 : connect a computer to the router (Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 in the address bar of Internet Explorer
Step 3 : Once you are at the router setup .. on the left side underneath Wireless you can find Wi-Fi Protected Setup
Click it
Step 4 : If it is asking for a password .. leave the password field blank and click submit
Step 5 : Disable Wi Fi Protected Setup and click apply changes
Step 6 : Now on the left under wireless click Security
Step 7 : If it is asking for a password .. leave the password field blank and click submit
Step 8 : Change the Security mode to WPA-PSK (you can also choose WPA-2 but sometimes it doesnt work )
Step 9 : Type a password (8 Characters , It is Case Sensitive)
Step 10: Click apply Changes
Step 11: On the left , Under Wireless Click Channel and SSiD
Step 12: Change the SSiD to a Different name , Change the Wireless Channel to 11
Step 13:Click Apply Changes
Turn On the Wireless Switch on the Computer (If you are using a Laptop to Connect between router)
Now try to Connect to this new network on both your wireless Computers and Ipad
Let Me Know if it Works
SOURCE: How do you set up
Your iPAd should see your wireless network like other devices do. Does your iPad not prompt you to connect to your home network? If it does you should enter your wireless pass key manually on your iPad.
Testimonial: "Bravo...you're my hero! Many thanks. "
SOURCE: how do i connect ipad to belkin wireless router
..just look for your network name or ssid .. on the ipad.. if it will ask you for a password just type in your network key..
95 views
Usually answered in minutes!
×