Question about Washing Machines

1 Answer

No cold water

Whirlpool Imperial 20 years old. Started cycle and tub was filling with cold water but water flow stopped while putting in clothes. Changed to Warm temperature and water started flowing again. When cycle got to the rinse portion it just sat there but when i switched to warm rinse tub filled again.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Souds like the cold valve has gone get and expert in to change it or change it yourself you can get parts from espares

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why would the hot water cycle of my washing machine not work?


The solenoid that opens to admit hot water is either defective or not being energized by control panel.

Jun 20, 2017 | Washing Machines

1 Answer

Cold water trickles into the tub while it is being filled up


The hot and cold water supply hoses that connect the washer from the water supply faucets on the wall to the water connections on the back of the clothes washer usually have filter / sediment screens within there connection fittings at the end of the hoses, these will collect dirt,sand, calcium deposits, etc.,when they trap enough of these materials they will plug up and restrict the flow of water into the clothes washer. Turn off the water faucets at the wall, and you should do this for both hot and cold hoses, disconnect the hoses from the washer and the water faucets, look into the hose ends and pull out the screens and clean them out by running water and what ever you can use to clean them completely!!!!!
Now look inside the water connections on the back of the clothes washer,where you screw the hoses on the washer, and check to see if there are filter screens in there, if there is, remove them and clean out completely also, then reverse the removal process and reconnect the hoses, makeing sure to connect the hot and cold hoses to the right connection on the back of the clothes washer!!
Try filling the washer with water to see if you have corrected the problem.
Make sure hot and cold hoses are correct on the back of the washer!!!!
GOOD LUCK !!!!!!

Aug 03, 2010 | Whirlpool Washing Machines

1 Answer

Washer temp setting changes by itself


I also have a Whirlpool washer/dryer for my condo, although I don't know the model number of mine. I had the same problem -- after it was precisely a year old, suddenly one day the hot and cold started coming out reversed. I was able to fix mine by more or less temporarily fiddling with the water pressure. What I did was one time, when the rinse cycle was running and the washer was filling up with hot water (grrrr...), I completely shut off the valve supplying hot water. So at that point the water stopped filling into the washer, and then I started tinkering with the cold water, twisting the valve off and on a few times. Then BINGO, suddenly the cold water "kicked in" and for the remainder of the rinse cycle, it filled the washer with cold water. I then turned the hot water valve back on, and since then it has been running correctly.

Jun 05, 2010 | Whirlpool Washing Machines

1 Answer

Whirlpool LXR9245EQ2 top loading washer tub won't fill


try taking the knob off and see if the nut is tight on the timer,it might if came loose

Jun 18, 2009 | Whirlpool Washing Machines

1 Answer

Whirlpool LXR9245EQ2 tub won't fill at beginning of cycle


HI, you have a combination issue. the Water fill level pressure switch and, the cycle selector switch are both damaged and, they should be replaced. the total cost of these switches will run you about $90.00.

We recommend the hands of a skilled service tech when repairing this type of electrical issue.

Jun 18, 2009 | Whirlpool Washing Machines

1 Answer

Water not filling on washer


the inlet filter is probably clogged restricted and/or inhibited flow of water into your machine.
These things happen, and cleaning out the filter is a good first step to finding the problem.

May 11, 2009 | Whirlpool WET3300S Top Load Stacked Washer...

1 Answer

Frigidaire (LTF2940E) Washer starts, stops, starts, stops...


The cycle doesn't advance When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

May 07, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Whirlpool Clothes Washer Model LSR7233DWO Cold Water Fill


It is a common problem. The water inlet valve (the item your fill hoses attach to) has a problem. first thing I would do is remove the hoses and check the screens inside the walve itself. If blocked, clean them. IF they are OKAY....WHile the hose if off place it in the washer tub and turn it on full blast. Does it flow with force? If so, you will need to replace the water inlet valve. While on cold....it trickles and turning it to warm, the machine sends power to both the hot and cold water solenoids and then you are forceful. Mostly hot and a trickle of cold.....Get the point? If I can help further...

Waiting to hear from you,
Eric Campion

Feb 14, 2009 | Whirlpool Washing Machines

2 Answers

Whirpool Duet won't spin clothes at high speed


Thinking of 2 things either the transmission is out or the clutch is burnt out and the drum basket and possibly the drive shaft broken as well. Prices vary greatly by how many of these things are broken but should run between 100-200 including labor.

Dec 10, 2008 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Water backflowing through the detergent fill valve


You have a cycle error and need hands on service!!
Bets to make the call and get it done right!
Please rate me at our site before you sign off!
Thank you!

It's not always a easy cure!

Sep 06, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...