Question about Konica Minolta magicolor 5430 DL Laser Printer

2 Answers

"fatal print spooler error" error message

"fatal print spooler error" error message appears on boot up. OSA is Windows XP SP. Printer is a "magicolor 2430 dl" Printer will not print.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 256 Answers

Hi,

Check the following steps to fix Printer Spooler Error :

Go to Start / Run and type in "services.msc" without quotation marks, then press Enter or click OK.

In the window that opens (Services) look for "Print Spooler" on the right

Right-click "Print Spooler" and select "Properties".

Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".

Make sure the 2 text boxes underneath say "1" in them.

Click Ok until you are back at the Services window, close it and you're good to go.

Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.

The Print spooler depends on the Remote Procedure Call (RPC) service. Is this service disabled? Go to services.msc look for RPC. Check state: Automatic

Posted on Jun 02, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 210 Answers

Completely uninstall the printer driver and install again. If this does not work, there is a corruption in the windows registry or in the print spooler cache files.

For a temporary workaround, disable print spooling. But, if you do, you will need to remember to never close an application you print from until printing is actually finished.

Posted on Aug 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Magicolor 2430 DL Fatal Error Code: 12H


Hello,

I advice you power off the magicolor 2430 DL and power on after few minutes, while the magicolor 2430 DL is loading or booting, pull out the plug from the AC outlet and wait for minutes before plugging it back and power on, if the problem still per, press the stop button for about 5 seconds and release, see what happens, if it fix the problem.

Let me no what happens.

Take care.

Jul 10, 2010 | Konica Minolta magicolor 2430 DL Laser...

3 Answers

I can not get the printer to stop printing ...what do i do?


Hi please turn off the printer and restart it after five minutes if you still have the problem please uninstall and reinstall the drivers for your printer.

Jun 13, 2010 | HP Office Equipment & Supplies

1 Answer

The printer won't print, and I get "fatal print spooler error". What do I do?


Hi there
You can try see if this may do it.

Go to Start / Run and type in "services.msc" without quotation marks, then press Enter or click OK.

In the window that opens (Services) look for "Print Spooler" on the right

Right-click "Print Spooler" and select "Properties".

Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".

Make sure the 2 text boxes underneath say "1" in them.

Click Ok until you are back at the Services window, close it and you're good to go.

Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.

The Print spooler depends on the Remote Procedure Call (RPC) service. Is this service disabled? Go to services.msc look for RPC. Check state: Automatic

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 08, 2010 | Konica Minolta magicolor 2400 Laser...

1 Answer

Installed vista 32 driver for networked 2300dl but can't print


Operations could not be completed; the print spooler service is not running.

May 08, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Print spooler service not running on Windows XP


Spooler depends on the RPC service being running. But you really need to get into event viewer and check for anything related to either RPC or Print Spooler. If you're trying to print to a network printer you could have firewall issues either within Windows or your router. Think about what changed on your system around the time this problem began.

Dec 30, 2008 | HP Pavilion dv6000z Notebook

1 Answer

Printing prob while adding printer on sharing basis


Hai

I have a SAMSUNG SCX-4100 Printer which is not working even though printer is installed to the system the message is appears as " WINDOWS CANNT CONNECT TO PRINTER, THE LOCAL PRINT SPOOLER SERVICE IS NOT RUNNING. PLEASE RESTART THE SPOOLER OR RESTART THE MACHIN. Please suggest in this regards.

Neelesh Agarwal

May 28, 2008 | Samsung SCX-4100 All-In-One Laser Printer

3 Answers

Konica minolta 5430dl colour printer


13D0H: Parameter Chip failure

Unplug the power cord and plug it in, then turn
OFF and ON the Power Switch.
the PWB-A may be faulty.

May 21, 2008 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

Minolta 2300 dl laser printer fatal error 17H


had printer for approximately 2 years. Used daily in office setting. today the printer tried to print, then just stopped and it said fatal error 17H in the window. We cleared paper jam and rebooted, gives the same error message. Anything we can do?

Apr 14, 2008 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

Stopped printing and isn't recognized


  In Windows XP print jobs can get caught in the print spooler, this will cause pending print jobs not to print. It may also hinder the user from uninstalling the printer driver. Usually you can delete the print job by opening the print spooler in the System Tray but this may not work with this problem. NOTE: This fix below also solves the problem of "The Printer Queue Is Full" error message.
One solution is to restart the spooler in Windows XP to clear it. Follow the instructions below to do this:
Click Start, then Control Panel.
  1. For Category View:

    • Click Performance and Maintenance.

    • Click Administrative tools.

    • Double-click Services.

  2. For Classic view:

    • Double-click Administrative Tools.

    • Double-click Services.

  3. In either, locate the print spooler on the list-->right-click-->choose Restart.

  4. A progress message will appear and the spooler should be clear.
You should now be able to print or remove the printer driver as you choose.

Oct 25, 2007 | Canon BJC S630 InkJet Printer

Not finding what you are looking for?
Konica Minolta magicolor 5430 DL Laser Printer Logo

1,415 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6674 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

Ben
Ben

Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...