How do I open the flashlight to change batteries

Hi,

please attempt to twist the top or the bottom of the flashlight off in order to open it and the batteries that you've mentioned. Otherwise, you can drop buy your local geeksquad/bestbuy to have a tech do the battery replacement for you.

Thank you.

Hello, Lori -

There is more than one style of Energizer Hard Case Flashlight.
- Professional Mult-Use Light
- Professional LED Task Light
- Spotlight
- Professional LED Inspection Light
- PivotPro Light
- LED Work Light
- LED Magnet Headlight
- Professional Rugged LED Headlight

Which one are you asking about?

Without knowing which model your question is about, I suggest you contact Energizer Customer Service and ask how to open your flashlight model to change the battery. This is the link to the Energizer Contact Us web page:
https://energizer.custhelp.com/

Best wishes.

To my knowledge all you have to do is screw off the lid at the back and replace the batteries some of these flashlights comes with a charger some doesn't

The flashlight uses 1 AA battery. My guess, you should only have to unscrew the end cap. If you finds it very hard to unscrew the end cap off, it could be from the battery has explode and swollen. MAYBE - I see this happen in my daughters MAG flashlight. DO not keep your flashlight in the car with the batteries installed. The amount of heat in the cars can ruin the batteries in the flashlight.

This is from the Sylvania site

• Dimensions: 2.4" long x 1.7" diameter
• Light Source: 0.4 watt non-replaceable LED
• Internal Battery: Sealed Ni-MH 3.6V 110mAH rechargeable battery

This look like it is not replaceable - amazon sells them fairly cheaply

95-112B - Stanley Tripod Flashlight battery replacement is in the center chamber. Open the three legs, then put your fingers around the bottom part of the center chamber and turn counter-clock wise. Wella put in 3 new AA Batteries.

Here's the info from Stanley How do change the batteries on Stanley 95 151 95 152 95 153 Flashlights

And the manual
Stanley Hand Tools

At the bottom of the Flashlight where the hole for a keychain ring is, or yours may have already came with the ring attached, although it may seem to be so perfectly welded or casted that thrrs no seam, if you twist the end by the ring attached or can grip it, the end twists off to allow you to switch the AA battery. Hope this helps

unscrew the rear piece to change batterys.

i think you unscrew the light end of the flashlight .... not the **** end