Question about RCA L32HD31 32 in. LCD HDTV

1 Answer

When I turned my TV on I can hear the sound but get no picture. I have unplugged the Direct tv box and no change. It worked fine yesterday.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

Most likely the tv has a power supply related problem. The most common thing to go out is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board.
I can't say it's 100% the problem because I can't actually look at the tv over the internet.
If you have some electronic experience, you can purchase a Service Manual over the internet and diagnose the source of the problem. The Service Manual will give you circuit diagrams, test points, and part# lists. Usually, cost under $20.

I hope I shed some light on the subject for you.

Posted on Jun 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 32" RCA LCD tv , rlc3210 power input says


Is it hooked up with HDMI cable?

If so try unplugging the HDMI cable and re plugging the cable in, sometimes those cables work loose and if they are not tight, it will cause your screen to flicker. Happens to my TV once in awhile.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_54ae41aaaffbab00

Aug 23, 2013 | Televison & Video

3 Answers

Sound quit working


Unplug power cord from outlet for 20 minutes , then plug back, this will reset tv

Mar 28, 2008 | Philips 14MS2331 14" TV

1 Answer

On/off problems with my LG 37LC7D TV. It is hooked up to Direct TV


You need to contact a local TV repair service, UNLESS you have the tools and the repair manual to repair it yourself, it will take diagnostic work to determine what is the cause, one thing is for sure you have a defective circuit board.

Jul 16, 2017 | LG 37LC7D 37 in. LCD HDTV

1 Answer

TV says no signal from direct tv box


Yes, something could have gotten changed.

Confirm what input connection the DirecTV receiver is connected to on the back of the TV. Using the remote, check that the TV has that input selected.

Dec 16, 2009 | Televison & Video

1 Answer

Yesterday our TV was making flickering in the picture got up this morning and the picture was black but had sound. We disconnected the satelite and no change. Took it to another hookup downstairs still the...


yes my tv did the same thing and but you could still hear the tv but no picture it was black,i took out the bulb and replace it.i just look up the model# of the tv and look it up on ebay.

Dec 05, 2009 | Sanyo DS25390 TV

1 Answer

Television is dead. won't turn on picture or


There is a fuse in tvs I've had to change one myself

Oct 16, 2009 | Mitsubishi CS-26201 TV

1 Answer

37" Dynex TV won't turn on


TV IS 2 YEARS OLD SAME PROBLEM AS ABOVE

Jan 04, 2009 | Dynex DX-LCD37 TV

1 Answer

TV will not stay on


You have done everything that a consumer can do. The problem is most likly in the horizontal section of the tv. This will be something for a repair shop to fix.

Nov 10, 2008 | Sharp 27K-S100 TV

1 Answer

Olevia


You should check to see if the sound is really coming from the TV- you may have the sound from the directTV cable box composite audio red and white RCA connectors.

Try connecting from the audio out of the TV to the stereo

Try the menu and see if you can adjust vertical and horizontal hold.

unplug tv for 10 minutes - tehn try again.

change battery in remote, if the remote does not seem to work

good luck

Oct 26, 2008 | Televison & Video

1 Answer

Picture on TV stuck on one picture


Ok fixed it. Just unplugged the box and plugged it back in and it works fine.

Apr 05, 2008 | Directv Plus DVR DTV Receiver / 100-Hours...

Not finding what you are looking for?
RCA L32HD31 32 in. LCD HDTV Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...