Question about Whirlpool RF368 Electric Kitchen Range

1 Answer


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Clock

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Need to set clock on my Chichester gas cooker no Manuel

Chichester gas cooker manual

The first 2 pages on a Google search are nothing but manuals.

Aug 04, 2016 | Kitchen Ranges

1 Answer

Why can't I set clock?

The range may have arrived with a defective clock.

Jan 08, 2016 | Kitchen Ranges

1 Answer

How do I get the range clock to stay lit?

Probably in the power save mode usually turns off after appx. 3 minutes owners manual will show how to turn off

Jan 21, 2015 | Kitchen Ranges

1 Answer

How do I set my sharp atomic clock. Put in new batteries and set time and date on back of clock but the outside temp is not registering?

That makes scence, you have to have an outside temperature probe. If it is wireless it also needs batteries. Check manual for more details.

Nov 07, 2014 | Sharp Atomic Dual Alarm Clock Spc315...

1 Answer

Good Morning - this is not a problem - only a question: how is the clock reset? I am renting an apt. and there is no owner's manual with the oven. There was a power outtage (happens pretty often) and,...

From page 9 of the user manual

This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
2. Press the TEMP/TIME "up" or "down" arrow pad to set the
time of day.

Oct 27, 2010 | Whirlpool RF364 Electric Kitchen Range

1 Answer

I have just moved into a house with Leisure rangemaster 110 dual fuel, how do i change the time on the clock have pressed all knobs in various sequences, found the automatic, the timer but cannot move it...
User manual.
When the clock is first connected, the display flashes ( 0.00) and (?) alternately. To set the time, turn and hold the Timer knob to the clock symbol (?) and at the same time turn the Adjusting knob left or right until the clock shows the time of day. Remember this is a 24-hour clock. Let go of the Timer knob and it will spring back to the vertical, oven manual setting.
It is on page 6 of manual

Mar 28, 2010 | Rangemaster 110 (Dual Fuel) Dual Fuel...

1 Answer

Time is on military time how do i switch it back

Hi, from page 6 in the owners manual it says:

"Setting the CLOCK
1. Press CLOCK pad. Indicator word TIME
will flash in the display.
2. Press the appropriate number pads for
the current time. (Time is in a 12-hour
After a power interruption, the last clock time
before the interruption will flash."

The timer goes up to 99 hours and 59 minutes, maybe that is what your seeing.

Jan 22, 2010 | Maytag MER6772 Gemini Electric Kitchen...

1 Answer

Oven dont work

First check your 20amp and 30amp fuses if any, at the top of your stove, many times this can save a lot of grief. If both your oven and broil are not turning on you could have an issue with the time setting on your clock. if you have an older manual type clock you will need to adjust the start and end time; basically if your clock is set on automatic and not manual mode you stove thinks it`s being kept on a certain time to start, therefore not allowing you to turn it on. If your clock is electronic try unplugging it and plugging it back in, a lot of times during a lightning storm the clock will get reset and wont run right until you unplug it and set the time again. if these are okay you will most likely have an issue with your oven control. hope this helps


Oct 11, 2009 | Hotpoint Kitchen Ranges

3 Answers

Setting Timer.

there might be three buttons under the clock
One button is for timer, one for stovetop preset and the other for oven preset.Press the second button for setting the clock.
awaiting your comments
happy holidays and good luck

Dec 24, 2008 | Kitchen Ranges

4 Answers

Westinghouse self cleaning oven manual or owners manual

Many White-Westinghouse manuals can be found here: I had the same problem and was able to solve it. They didn't have the exact manual for mine (a KF450G), but they had one that was similar enough (KF580H) to solve this issue. Setting the knobs to clean is only part of the process, to get it to run you need to set the timer. Read the key information below transcribed from the manual: --- To set the controls for the cleaning cycle: 1) Close the oven door. 2) Be sure the clock shows the correct time of day. 3) Be sure the Start Time knob is set for the same time as the clock. If not, turn the knob to the time on the clock. The knob will then pop out. 4) Push in and set the Stop Time knob for 2 to 3 hours past the Start Time. Example: If the Start Time and Clock read 1:00, set the Stop Time for 3:00 or 4:00. 5) Turn the Temperature Control to CLEAN. 6) Turn the Selector to CLEAN. If all controls are set correctly, the oven signal light will come on and stay on until the oven reaches its cleaning temperature. It will then cycle on and off. --- There is more information in the manual, but it's much too much information to manually transcribe - I've only typed enough for you to get it working. Note that the LOCKED light won't light initially, it only lights once the oven exceeds 550 degrees. Once that light is on, the oven will not reopen until the temperature drops below that point, even if you stop the clean cycle. Be sure to empty out the storage drawer under the oven before cleaning.

Dec 08, 2007 | Kitchen Ranges

Not finding what you are looking for?
Whirlpool RF368 Electric Kitchen Range Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Cindy Wells

Level 3 Expert

4723 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides