How do I re-set vcr to 00:00 using rca universal remote rcu600m?

Codes to check with Apex brand TVs are: 0036 0037. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
If the above said codes do not work with your TV, refer these sites. You can get many codes for Apex TV, with different brand remote controls. Try them.

If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier. Or, do a search by type in the brand name of your device at its search box, and press "Enter".
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
It is too difficult to type in all the procedure here by this window.

Hello
Setup code for Symphonic TV/VCR with Jumbo remote control is: [002].
There is no setup codes for TV/VCR combo with RCA RCU600M remote control. OK.

hi! i have a couple of codes for your tv, just try them,
1145, 3095, 1027, 2064, 3105, 1124, 2078, 3088, 1296, 2213, 3147, 1150, 2092, 1464, 2408, 1465, 2260, 1046, 1465, 1004, 1007, 1018, 1027, 1047, 1056, 1057, 1059, 1060, 1061, 1103, 1124, 1145, 1150, 1153, 1279, 1296, 1387, 1464, 1483, hope this helps! goodluck!!!!

RCA 000,006,011,019,027,034,038,044,046,088 <-----codes

Programming a Device using Code Search:

1. Manually turn ON your device (TV, VCR, Cable Box)
2. Press and "HOLD" CODE SEARCH
3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the device turns off, press and release ENTER.
7. With the device on, press any other button.

If the device responds, no further programming is required.

If the device does not respond, repeat steps 1-6.

Try this site which give you the steps http://www.eliztech.com/remotes/rca-howto.php. Hope that hepls.

I am not positive that this will work for you, but it did for me. I have a Sanyo tv set that was stuck zoomed in. I have mediacom and a remote that is given with the cable box that was programmed to work on the tv, on this remote at the bottom the "#" button says "Aspect" above it and after pushing it the problem was fixed. I hope this helps.

need code for a sanyo rmt-u100

Go to the RCA website
=> http://66.77.167.109/rcaaccessories/

Type RCU600M in the search manual dialog box.
Download the PDF.

or download it using this link

=> http://66.77.167.109/rcaaccessories/RcaaccessoriesInfo.do?findManual=RCU600M

or view it online

http://66.77.167.109/rcaaccessories/docs/man/RCU600M_DOC_OM.PDF

Follow this link hope this will help you Sir .. http://www.retrevo.com/support/RCA-RCU600M-Universal-Remotes-manual/id/402dj593/t/2/

There is a button for get manual here