Question about iLO 3200 32 in. LCD Television

1 Answer

I have a 37" ilo tv and the power light flashes red and the picture won't come on.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

Most TVs have a "Protection Mode" that flashes a red light when it detects a failed part inside the tv.
The most likely the tv has a power supply related problem. The most common thing to go out is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board.
I can't say it's 100% the problem because I can't actually look at the tv over the internet.
If you have some electronic experience, you can purchase a Service Manual over the internet and diagnose the source of the problem. The Service Manual will give you circuit diagrams, test points, and part# lists. Usually, cost under $20.

I hope I shed some light on the subject for you.

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Philips 42pf5321d/37 that won't turn on.


send me a email sonny@tvcircuitboards.com and I can assist you with troubleshooting it to determine whats happening with the set.

Aug 07, 2012 | Televison & Video

1 Answer

Philip tv no picture no sound


I have the model Philips 37PF7320A/37 won't turn on and MOST articles on the Internet say it's the Capacitors capictors capictors..I checked all of them. My tv just blinked red lights, had the clicking sound at first power on, but then goes black. No sound. No picture. Nothing. Just blinking red lights.

MINE WAS RESISTOR no. 3318 , a 100 OHM RESISTOR ON POWER SUPPLY BOARD.

I BOUGHT REPLACEMENT FOR .99 CENTS SOLDER IT, AND EVERYTHING WORKED!!!

THAT WAS ALL IT TOOK.

JUST A SUGGESTION..
1. CHECK FOR BULGING CAPACITORS (90 PERCENT OF THE PROBLEM)
2. THEN CHECK FOR RESISTORS WITH MULTIMETER ( FALLS INTO THE OTHER 10 PERCENT OF THE PROBLEM.)

TELL ME IF THAT HELPS..normanw1@yahoo.com

Oct 30, 2011 | Philips 52PFL7422D/37 TV

1 Answer

Philips tv model number 50PFP5332D 37 wont power up


I have the model Philips 37PF7320A/37 won't turn on and MOST articles on the Internet say it's the Capacitors capictors capictors..I checked all of them. My tv just blinked red lights, had the clicking sound at first power on, but then goes black. No sound. No picture. Nothing. Just blinking red lights.

MINE WAS RESISTOR no. 3318 , a 100 OHM RESISTOR ON POWER SUPPLY BOARD.

I BOUGHT REPLACEMENT FOR .99 CENTS SOLDER IT, AND EVERYTHING WORKED!!!

THAT WAS ALL IT TOOK.

JUST A SUGGESTION..
1. CHECK FOR BULGING CAPACITORS (90 PERCENT OF THE PROBLEM)
2. THEN CHECK FOR RESISTORS WITH MULTIMETER ( FALLS INTO THE OTHER 10 PERCENT OF THE PROBLEM.)

TELL ME IF THAT HELPS..normanw1@yahoo.com

Oct 30, 2011 | Philips 50PFP5332D 50 in. Plasma...

3 Answers

I have a 37" Philips (37PF9431D/37) flat panel tv. It won't power on. When you plug it in you can hear a click the green light stays on for a few seconds then goes out. I've checked the power board for bad...


i am having the same problem. My Phillips 37" 37PF9431D/37I LCD High Definition TV won;t turn on. When I press the power button i hear a click and the green light comes on for a couple of seconds and then the red light appears. I can;t figure it out. Did you find a solution?

May 20, 2010 | Philips 37PF7320A 37 in. HD-Ready LCD...

1 Answer

No Picture


Most likely your power control board which can be rebuilt for less than $100.00.
remove the back of the tv.
the board number is on the right bottom of the pcb (i.e. MLT169B )
enter that # on ebay, estorerex rebiulds them

Mar 26, 2009 | iLO 3200 32 in. LCD Television

1 Answer

The ILO tv will not come on at all


tv clicks on but no picture, red light flashes awhile than goes off.

Mar 23, 2009 | iLO 3200 32 in. LCD Television

1 Answer

Ilo 27" lcd tv


If your LCD has a defective power supply module will cause the following symptoms:
No Display and no Sound, Then Power indicate light changes from Green to Red.

Apr 29, 2008 | iLO LCT32HA36 Television

1 Answer

Ilo-27 lcd


I CAN,T GET IT TO CHANGE CHANNELS. I DON,T HAVE THE ORIGINAL REMOTE SO I HAVE TO USE A UNIVERSAL AND IT WON,T PROGRAM.

Jan 13, 2008 | iLO 3200 32 in. LCD Television

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Jaime Hernandez

Level 3 Expert

2317 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...