Sony cyber-shot 4.1 Carl Zeiss Vario-Tessar Problems. When turned on it goes to a second screen and says ACCESS after about 1 minute it says ''Turn the power off and on again'' and it beeps. (Also the lens do not retract)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If they still show when you look for them in the camera, they're probably retrievable. Plug in the camera, but instead of using the camera software on your computer, look at your Computer for the camera, or removable HD listed with the C: drive and other devices, locate the DCIM folder, find the pics, drag where you want them.
If you press the MENU button while shooting or during playback,
(Settings) is provided as a final selection [icon is a case].
You can change the default settings on the (Main Settings) screen.
The Main settings icon is a [wrench + hammer].
The Language Setting is the third option.
Down load the ueser guide and go through Page no 53 for getting the tips regarding resetting your camera to factory settings. to down load the user guide click here. User Guide goodluck If my solution proves useful please rank me. Regards Arjun
easy method from the front of camera:
unstick ring "Carl Zeiss Vario-Tessar 2,7 et."
unscrew the 3 silver bolt
remove rubber ring
unscrew 3 black bolt
with carefully remove lens, watchful cooper washer 3 x 3 pieces
blow with blow-pipe (rubber pear) about a side-wall of objective
to remove dirt from slideway.